Nanoporous Ag-Cnts foamed electrode for lithium intercalation

Khoshnevisan, B.; Pourghasemian, H.

Please use this identifier to cite or link to this item: http://essuir.sumdu.edu.ua/handle/123456789/20610

Or use following links to share this resource in social networks: Recommend this item

Title	Nanoporous Ag-Cnts foamed electrode for lithium intercalation
Authors	Khoshnevisan, B. Pourghasemian, H.
ORCID
Keywords	carbon nanotubes Li intercalation electrophoresis deposition
Type	Conference Papers
Date of Issue	2011
URI	http://essuir.sumdu.edu.ua/handle/123456789/20610
Publisher	Sumy State University
License	Copyright not evaluated
Citation	Khoshnevisan, B. Nanoporous Ag-Cnts foamed electrode for lithium intercalation [Текст] / B. Khoshnevisan, H. Pourghasemian // Nanomaterials: applications & properties. Proceedings : 1-st International conference, Alushta, Crimea, 27-30 Semptember 2011 / Edited by: A. Pogrebnjak, T. Lyutyy, S. Protsenko. — Sumy : Sumy State University, 2011. — V.2, P.І. — C. 101-104.
Abstract	Intercalation of lithium into Ag-CNTs sample is reported here. We have used a nano- porous silver foam as a frame for deposition of the CNTs inside the pores by electrophoresis deposition (EPD) technique. By using chronopotentiometry method, we have noticed that the Li storage capacity of the prepared Ag-CNTs electrode was im- proved noticeably in comparison with literature. In addition, a very good functional stability for the prepared electrode has been tested during subsequent cycles of charge / discharge (C&D) procedures. By scanning the cycle's regulated current from 0.2 up to 1.0 mA , it was shown that in the range of 0.4 - 0.6 mA the Li storage capacity and reversibility of the C&D cycles became optimum, as well. When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/20610
Appears in Collections:	Наукові видання (ЕлІТ)