Modeling of Processes in Co-Based Coatings Exposed to Plasma Jet Irradiation

Алонцева, Д.; Alontseva, D.; Pohrebniak, Oleksandr Dmytrovych; Колесникова, T.; Kolesnikova, T.; Руссакова, A.; Russakova, A.

Please use this identifier to cite or link to this item: http://essuir.sumdu.edu.ua/handle/123456789/33935

Or use following links to share this resource in social networks: Recommend this item

Title	Modeling of Processes in Co-Based Coatings Exposed to Plasma Jet Irradiation
Authors	Алонцева, Д. Alontseva, D. Pohrebniak, Oleksandr Dmytrovych Колесникова, T. Kolesnikova, T. Руссакова, A. Russakova, A.
ORCID	http://orcid.org/0000-0002-9218-6492
Keywords	computer simulation plasma-detonation coatings structure-phase compositions
Type	Article
Date of Issue	2013
URI	http://essuir.sumdu.edu.ua/handle/123456789/33935
Publisher	Materials Science (MEDŽIAGOTYRA)
License	Copyright not evaluated
Citation	Modeling of Processes in Co-Based Coatings Exposed to Plasma Jet Irradiation [Текст] / T. Kolesnikova, D. Alontseva, A.D. Pohrebniak, A. Russakova // Materials Science (MEDŽIAGOTYRA). — 2013. — 19, №3. — P.277-282
Abstract	The model of microstructure of thick (about 300 μm) plasma detonated Co-based coatings on steel substrates is suggested on the basis of experimental research. Computer simulation of temperature distribution in depth from the surface of coatings under plasma jet irradiation was done; and certain parameters for additional treatment by irradiation were proposed. The irradiation was carried out according to the design conditions. It was established that the roughness of the modified coatings decreased by 2 times, microhardness increased on the average by 25 %. There was established the evolution of the structure and phase composition of the coatings after irradiation, which caused the improvement of their strength. When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/33935
Appears in Collections:	Наукові видання (ЕлІТ)