Effects of Epoxy-Polyester Hybrid and Nanoclay on Morphology, Rheological and   Mechanical Properties of Styrene-Butadiene Rubber

Haghnegahdar, M.; Alipour, A.

Please use this identifier to cite or link to this item: http://essuir.sumdu.edu.ua/handle/123456789/35065

Or use following links to share this resource in social networks: Recommend this item

Title	Effects of Epoxy-Polyester Hybrid and Nanoclay on Morphology, Rheological and Mechanical Properties of Styrene-Butadiene Rubber
Authors	Haghnegahdar, M. Alipour, A.
ORCID
Keywords	Rheological Properties Epoxy-Polyester Hybrid Nanoclay XRD SEM Photomicrograph Mechanical Properties
Type	Conference Papers
Date of Issue	2012
URI	http://essuir.sumdu.edu.ua/handle/123456789/35065
Publisher	Sumy State University
License
Citation	Haghnegahdar, M. Effects of Epoxy-Polyester Hybrid and Nanoclay on Morphology, Rheological and Mechanical Properties of Styrene-Butadiene Rubber [Текст] / M. Haghnegahdar, A. Alipour // Nanomaterials: Applications & Properties (NAP-2012) : 2-nd International conference, Alushta, the Crimea, September 17-22, 2012 / Edited by: A. Pogrebnjak. - Sumy : Sumy State University, 2012. - V.1, No1. - 01NDLCN08
Abstract	Properties of SBR compounds filled with two kinds of filler, Epoxy-Polyester Hybrid resin(EPH) (10, 20, 30, 40 phr) and Nanoclay (Closite 15 A) (1, 3, 5, 7 phr) were studied. Microcomposite samples and nanocomposite samples were prepared by Haake internal mixer. Curing agents and additives i.e. dicumylperoxide Properties of SBR compounds filled with two kinds of filler, Epoxy-Polyester Hybrid resin(EPH) (10, 20, 30, 40 phr) and Nanoclay (Closite 15 A) (1, 3, 5, 7 phr) were studied. Microcomposite samples and nanocomposite samples were prepared by Haake internal mixer. Curing agents and additives i.e. containing 30 phr resin show higher value of modulus than sample containing 7 phr nanocaly. Rheological measurement showed that both fillers lead to an increase in viscosity and dynamic modulus of samples which is as a result of good interaction established between polymer/filler. Moreover, due to nanometer scale of nanoclay particles, reinforcing effect of Nanoclay was more noticeable and in micrometer scale of Epoxy-Polyester Hybrid particles, Epoxy resin cured by Polyester is used to improved wet ability of SBR compounds. SEM photomicrographs of cryogenically fractured samples confirmed the mentioned results. When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/35065
Appears in Collections:	Наукові видання (ЕлІТ)