The Wear Resistance of the Nanocomposite Coatings Obtained by the Cumulative- Detonation Device

Tyurin, Yu.N.; Arseenko, M.Yu.; Prozorova, M.S.; Kolisnishenko, O.V.; Kovaleva, M.G.

Please use this identifier to cite or link to this item: http://essuir.sumdu.edu.ua/handle/123456789/35152

Or use following links to share this resource in social networks: Recommend this item

Title	The Wear Resistance of the Nanocomposite Coatings Obtained by the Cumulative- Detonation Device
Authors	Tyurin, Yu.N. Arseenko, M.Yu. Prozorova, M.S. Kolisnishenko, O.V. Kovaleva, M.G.
ORCID
Keywords	Cumulative-detonation technology Aluminium alloys Nanostructured composite coatings Wear resistance
Type	Conference Papers
Date of Issue	2012
URI	http://essuir.sumdu.edu.ua/handle/123456789/35152
Publisher	Sumy State University
License	Copyright not evaluated
Citation	The Wear Resistance of the Nanocomposite Coatings Obtained by the Cumulative- Detonation Device / Y. N. Tyurin, M. Y. Arseenko, M. S. Prozorova et al. // Nanomaterials: Applications & Properties (NAP-2012) : 2-nd International conference, Alushta, the Crimea, September 17-22, 2012 / Edited by: A. Pogrebnjak. - Sumy : Sumy State University, 2012. - V. 1, No3. - 03PCSI07
Abstract	Nanocomposite coatings based on Ti, O, C and H were deposited on aluminium samples by using the cumulative-detonation equipment. The nanocomposite coatings were examined by scanning electron microscopy (SEM), transmission electron microscopy (TEM) with diffraction, X-ray phase analysis, hardness measurements and tribotests. It was established that the wear of nanocomposite coatings based on Ti, O, C and H less than to the wear of material of the substrate. For the nanocomposite coating which were formed from the hydrogenated titanium powder was recorded the lowest wear and coefficient of friction. When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/35152
Appears in Collections:	Наукові видання (ЕлІТ)