Sliding Performance of PEI Composites Under Dry Atmospheric Conditions

Mimaroglu, A.; Unal, H.

Please use this identifier to cite or link to this item: http://essuir.sumdu.edu.ua/handle/123456789/35268

Or use following links to share this resource in social networks: Recommend this item

Title	Sliding Performance of PEI Composites Under Dry Atmospheric Conditions
Authors	Mimaroglu, A. Unal, H.
ORCID
Keywords	Composite PEI PPS BMC Steel
Type	Conference Papers
Date of Issue	2013
URI	http://essuir.sumdu.edu.ua/handle/123456789/35268
Publisher	Sumy State University
License	Copyright not evaluated
Citation	Mimaroglu, A. Sliding Performance of PEI Composites Under Dry Atmospheric Conditions [Текст] / A. Mimaroglu, H. Unal // Nanomaterials: Applications & Properties (NAP-2013) : 2-nd International conference, Alushta, the Crimea, September 17-22, 2012 / Edited by: A. Pogrebnjak. - Sumy : Sumy State University, 2013. - V.2, No1. - 01PCSI11
Abstract	In this work, the dry sliding wear behavior of PEI+15%PTFE and PEI+20%GFR polymer composites rubbing against PPS+40%SGFR, BMC+15%LGFR and stainless steel were investigated using a pin–on– disc arrangement. Test conditions were 20 to 60N loads and at 0.5 m/s sliding speeds. It was observed that, the specific wear rate showed very little sensitivity to the varying load. For all material combinations used in this investigation, the coefficient of friction decreases linearly with the increase in load. The specific wear rate decreases with the increase in applied load for polymer-polymer combinations but increases or shows no change with the increase in load value for polymer- steel disc combinations. Finally it is concluded that the wear resistance of 15% PTFE filled PEI composite is higher than that of 20% glass fibre reinforced poly-ether-imide polymer composite against different polymer and steel counter-faces. When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/35268
Appears in Collections:	Наукові видання (ЕлІТ)