Involving Low-Pressure Plasma for Surface Pre-Treatment and Post Print Sintering of Silver Tracks on Polymer Substrates

Solodovnyk, A.N.; Chen, Q.; Li, W.; Fei, F.

Please use this identifier to cite or link to this item: http://essuir.sumdu.edu.ua/handle/123456789/35392

Or use following links to share this resource in social networks: Recommend this item

Title	Involving Low-Pressure Plasma for Surface Pre-Treatment and Post Print Sintering of Silver Tracks on Polymer Substrates
Authors	Solodovnyk, A.N. Chen, Q. Li, W. Fei, F.
ORCID
Keywords	Plasma treatment Polypropylene surface activation Inkjet printing Roll-blade deposition Nanosilver ink PVP etching
Type	Conference Papers
Date of Issue	2012
URI	http://essuir.sumdu.edu.ua/handle/123456789/35392
Publisher	Sumy State University
License	Copyright not evaluated
Citation	Involving Low-Pressure Plasma for Surface Pre-Treatment and Post Print Sintering of Silver Tracks on Polymer Substrates / A. N. Solodovnyk, Q. Chen, W. Li, F. Fei // Nanomaterials: Applications & Properties (NAP-2012) : 2-nd International conference, Alushta, the Crimea, September 17-22, 2012 / Edited by: A. Pogrebnjak. - Sumy : Sumy State University, 2012. - V. 1, No4. - 04PITSE04
Abstract	A method of production conductive silver tracks on thermally sensitive polymer (BOPP) was offered, involving plasma for preprint polymer surface activation to enable better adhesion properties and postprint selective etching to reduce amounts of polymer and raise electroconductivity. Inkjet, spin coating, and roll-blade coating were the methods of application of silver nanoparticle inks. We report to achieve two magnitudes lower sheet resistance of silver thin film with no effect on polymer substrate. This method with little modification could be adopted for production of flexible electronics on highly thermally sensitive polymers. When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/35392
Appears in Collections:	Наукові видання (ЕлІТ)