Please use this identifier to cite or link to this item:
http://essuir.sumdu.edu.ua/handle/123456789/46991
Or use following links to share this resource in social networks:
Tweet
Recommend this item
Title | Combined reactive/non-reactive DC magnetron sputtering of high temperature composite AlN–TiB2–TiSi2 |
Authors |
Pshyk, A.V.
Coy, L.E. Yate, L. Załęski, K. Nowaczyk, G. Jurga, J. Pohrebniak, Oleksandr Dmytrovych ![]() |
ORCID |
http://orcid.org/0000-0002-9218-6492 |
Keywords |
Hard coatings Nanocomposite Functionally graded film Nanoindentation Wear test |
Type | Article |
Date of Issue | 2016 |
URI | http://essuir.sumdu.edu.ua/handle/123456789/46991 |
Publisher | Elsevier |
License | Copyright not evaluated |
Citation | Combined reactive/non-reactive DC magnetron sputtering of high temperature composite AlN–TiB2–TiSi2 [Текст] / A.V. Pshyk, L.E. Coy, L. Yate [та ін.] // Materials and Design. — 2016. — №94. — С. 230-239. |
Abstract |
High temperature composite target AlN–TiB2–TiSi2 with heterogeneous distribution of compounds (AlN—50 wt.%; TiB2—35 wt.%; TiSi2—15 wt.%) is used for sputtering via combined reactive/non-reactive DC magnetron sputtering onto substrate materials either cylindrical polished steel (Fe, 18%—Ni, 12%—Cr, 10%—Ti) 3 mm diameter or monocrystalline silicon. The gradient coating has been produced by sequential non-reactive and reactive sputtering of the target. The structural and morphological properties of the deposited films are analyzed by transmission electron microscopy, scanning electron microscopy, atomic force microscopy, X-ray photoelectron spectroscopy and Raman spectroscopy. The tribo-mechanical properties are studied by means of nanoindentation and nanowear tests. The gradient film is composed of two layers with different microstructure and elemental composition. The first layer with thickness ~200 nm is mainly based on light B, C and N as well metal elements Al, Si and Ti. The presence of very well distributed nanocrystals embedded in an amorphous matrix, with crystal sizes ranging from 5 to 40 nm is observed in the second layer ~700 nm thickness and composed of Al, Ti, Si, B, and N. Films show very flat surfaces, with roughness around 0.35 nm. The hardness, elastic modulus, elastic recovery (We), H/E⁎ ratio and H3
/E⁎2 ratio are determined as 17.55 GPa, 216.7 GPa, 60%, 0.08 and 0.12 GPa, respectively. Nanowear tests demonstrate relatively high wear resistance of the coatings. Samples show promising characteristics for hard protective adaptive coatings and diffusion barriers due to short propagation of dislocations in the amorphous matrix and the elastic and hard nature of the nanocomposite structure. |
Appears in Collections: |
Наукові видання (ЕлІТ) |
Views

1

-1667372248

-1667372242

26049590

1

2543125

1

6799

1

-1667372245

1

215806930

93567191

-1820669752

-1973967267

1

71354
Downloads

93567194

1883984

93567187

1

1

-1109157968

1

1

-1667372241

1

-1109157971

1224851

1

5086249

93567187

71352

1

26049590

1

27196

59808390

1

1754

1

1

215806929

3

5117

1

647419114

-1109157971

-1667372246

-1973967267

1
Files
File | Size | Format | Downloads |
---|---|---|---|
Combined reactive_Pshyk.pdf | 2.27 MB | Adobe PDF | 1191835038 |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.