Method of Obtaining a Composite Material Based on Small-Dispersed Particles

Batryshev, D.G.; Ramazanov, T.S.; Dosbolayev, M.K.; Gabdullin, M.T.; Yerlanuly, Ye.

Please use this identifier to cite or link to this item: http://essuir.sumdu.edu.ua/handle/123456789/47631

Or use following links to share this resource in social networks: Recommend this item

Title	Method of Obtaining a Composite Material Based on Small-Dispersed Particles
Authors	Batryshev, D.G. Ramazanov, T.S. Dosbolayev, M.K. Gabdullin, M.T. Yerlanuly, Ye.
ORCID
Keywords	composite material small-dispersed particles plasma catalyst RF discharge
Type	Article
Date of Issue	2016
URI	http://essuir.sumdu.edu.ua/handle/123456789/47631
Publisher	Sumy State University
License	Copyright not evaluated
Citation	Method of Obtaining a Composite Material Based on Small-Dispersed Particles [Текст] / D.G. Batryshev, T.S. Ramazanov, M.K. Dosbolayev [et al.] // Журнал нано- та електронної фізики. - 2016. - Т.8, №3. - 03053
Abstract	In this work a method of obtaining a composite material based on small-dispersed particles is considered. Proposed method consists of two steps of separation, mechanical – rough separation and plasma – soft separation, and also of step of deposition a catalytic nanolayer by wet impregnation of separated particles in an aqueous solution of nickel nitrate. During such procedure a composite powder of small-dispersed zeolite particles with average diameter of 5 hm and catalytic nickel layer was obtained. All obtained samples were studied on a Quanta 3D 200i scanning electron microscope. Microscopic analysis and obtained experimental results show, that increasing of dispersion of separated powder allows for increasing a mass of catalyst in the composite, and the used separation method in plasma for obtaining of particles with high dispersion do not erode a catalytic layer.
Appears in Collections:	Журнал нано- та електронної фізики (Journal of nano- and electronic physics)