Please use this identifier to cite or link to this item:
http://essuir.sumdu.edu.ua/handle/123456789/64241
Or use following links to share this resource in social networks:
Tweet
Recommend this item
Title | Multilayer design of CrN/MoN protective coatings for enhanced hardness and toughness |
Authors |
Postolnyi, Bohdan Oleksandrovych
Pohrebniak, Oleksandr Dmytrovych Bondar, Oleksandr Viacheslavovych Beresnev, V.M. Abadias, G. Rebouta, L. Araujo, J.P. |
ORCID |
http://orcid.org/0000-0002-9218-6492 http://orcid.org/0000-0003-3174-0709 |
Keywords |
Nitrides hard coating Physical vapour deposition diffraction structure Mechanical properties |
Type | Article |
Date of Issue | 2017 |
URI | http://essuir.sumdu.edu.ua/handle/123456789/64241 |
Publisher | Elsevier |
License | |
Citation | Multilayer design of CrN/MoN protective coatings for enhanced hardness and toughness [Text] / B.O. Postolnyi, V.M. Beresnev, G. Abadias [et al.] // Journal of Alloys and Compounds. - 2017. - №725. - С. 1188-1198. - DOI: 10.1016/j.jallcom.2017.07.010 |
Abstract |
We report on CrN/MoN multilayer coatings, their structure, elemental and phase composition, residual stresses, mechanical properties and their dependence on deposition conditions. The hardness and toughness were considered as main parameters for improvement of the protective properties of coatings. Multilayers with varying bilayer periods, ranging from 40 nm to 2.2 μm, were obtained by using cathodic arc physical vapour deposition (Arc-PVD) on stainless steel substrate. The elemental analysis was performed using wavelength-dispersive X-ray spectroscopy (WDS). The surface morphology and cross-sections were analysed with scanning electron microscopy (SEM). The X-ray diffraction (XRD) measurements, including grazing incidence X-ray diffraction (GIXRD), in-plane diffraction analysis and electron backscatter diffraction (EBSD), were used for microstructure characterisation. Mechanical properties of deposited films were studied by measuring hardness (H) and Young's modulus (E) with micro-indentation, H/E and H3/E2 ratios were calculated. The dependences of internal structure and, hence, mechanical properties, on layer thickness of films have been found. Significant enhancement of hardness and toughness was observed with decreasing individual layer thickness to 20 nm: H = 38–42 GPa, H/E = 0.11. |
Appears in Collections: |
Наукові видання (ЕлІТ) |
Views
China
1
Côte d’Ivoire
1
Germany
257125
Greece
1
Ireland
1140256
Japan
1343300142
Lithuania
1
Netherlands
5267
Singapore
-1993431603
Sweden
1
Ukraine
-1608367012
United Kingdom
24837207
United States
308104089
Unknown Country
-1877859812
Vietnam
40042
Downloads
Austria
1
Belarus
1
Canada
1
China
2
Colombia
24837206
Finland
1
France
228992730
Germany
-1993431601
India
1
Indonesia
1
Ireland
3419746
Italy
1
Japan
308104091
Lithuania
1
Malaysia
1
Romania
1
Singapore
-1993431602
Slovenia
1
South Africa
18834457
Ukraine
1069625830
United Kingdom
3419745
United States
-1993431604
Unknown Country
97
Vietnam
198105
Files
File | Size | Format | Downloads |
---|---|---|---|
Postolnyi_Multilayer.pdf | 4.05 MB | Adobe PDF | -27895491 |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.