Please use this identifier to cite or link to this item:
http://essuir.sumdu.edu.ua/handle/123456789/68199
Or use following links to share this resource in social networks:
Tweet
Recommend this item
Title | Ecologically Safe Process for Sulfo-Aluminizing of Steel Parts |
Other Titles |
Екологічно безпечний спосіб сульфоалітування сталевих деталей |
Authors |
Plyatsuk, L.D.
Tarelnyk, V.B. Kundera, Cz. Radionov, O.V. Gaponova, O.P. |
ORCID | |
Keywords |
electroerosion alloying ecological compatibility surface layer aluminizing sulfidizing microstructure microhardness електроерозійне легування екологічність поверхневий шар алітування сульфідування мікроструктура мікротвердість |
Type | Article |
Date of Issue | 2018 |
URI | http://essuir.sumdu.edu.ua/handle/123456789/68199 |
Publisher | Sumy State University |
License | |
Citation | Ecologically Safe Process for Sulfo-Aluminizing of Steel Parts [Текст] / L.D. Plyatsuk, V.B. Tarelnyk, Cz. Kundera [et al.] // Журнал інженерних наук. - 2018. - Т. 5, № 1. - С. С16-С20. - DOI: 10.21272/jes.2018.5(1).c4. |
Abstract |
The present technical solution refers to the field of electrophysical and electrochemical processing of parts, in particular, to the electroerosion alloying (EEA) of the surfaces of steel parts with aluminum (aluminizing) and sulfur (sulfidizing), and it can be used to treat the surfaces of heat-treated steel parts in order to increase their hardness, wear resistance, to prevent frictional seizure and improve the resistance to atmospheric corrosion. When aluminizing steel parts with the use of the method of electroerosion alloying (EEA) by aluminum electrode at discharge energy Wp = 0.52–6.8 J and productivity of 1.0–3.0 cm2 / min, before the EEA process by an aluminum electrode, to the surface of the part to be aluminized, there is applied a consistency substance containing sulfur and aluminum powder, and thereafter, not having waited for drying of the consistency substance, the process of aluminizing by the EEL method with an aluminum electrode is carried out, and the consistency substance should have the aluminum powder content of not more than 56 %. There have been carried out metallographic and durametric analyses of the features of the surface layers made of carbon steels after simultaneous aluminizing and sulfidizing them by the EEA method. It is shown that the structure of the layer consists of three portions, namely, a “white” layer, a diffusion zone and a base metal. Such qualitative surface layer parameters as thickness, “white” layer and transition zone microhardness values, and also roughness increase with increasing discharge energy. The “white” layer continuity for all the investigated discharge energies of Wp = 0.52, 2.60 and 6.80 J is 100 %. |
Appears in Collections: |
Journal of Engineering Sciences / Журнал інженерних наук |
Views
Australia
62903033
China
5274592
Finland
1
Germany
98016
Greece
1
Ireland
16792
Italy
1
Japan
31451517
Lithuania
1
Netherlands
390
Sweden
1
Ukraine
629693
United Kingdom
315530
United States
227128060
Unknown Country
629692
Vietnam
2732
Downloads
Ireland
55058
Italy
1
Japan
1
Lithuania
1
Poland
1
Thailand
1
Ukraine
10549183
United Kingdom
1
United States
125806066
Unknown Country
328450053
Vietnam
1
Files
File | Size | Format | Downloads |
---|---|---|---|
JES_2018_01_C16-C20.pdf | 340.33 kB | Adobe PDF | 464860367 |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.