Please use this identifier to cite or link to this item: https://essuir.sumdu.edu.ua/handle/123456789/85294
Or use following links to share this resource in social networks: Recommend this item
Title Influence of Spray Nozzle Operating Parameters on the Fogging Process Implemented to Prevent the Spread of SARS-CoV-2 Virus
Authors Fedak, W.
Ulbrich, R.
Ligus, G.
Wasilewski, M.
Kołodziej, S.
Wasilewska, B.
Ochowiak, M.
Włodarczak, S.
Krupińska, A.
Pavlenko, Ivan Volodymyrovych  
ORCID http://orcid.org/0000-0002-6136-1040
Keywords COVID-19
droplet diameter
fogging
fumigation
nozzle
PIV
SARS-CoV-2
spray
turbulent flow intensity factor
Type Article
Date of Issue 2021
URI https://essuir.sumdu.edu.ua/handle/123456789/85294
Publisher MDPI
License Creative Commons Attribution 4.0 International License
Citation Fedak W, Ulbrich R, Ligus G, Wasilewski M, Kołodziej S, Wasilewska B, Ochowiak M, Włodarczak S, Krupińska A, Pavlenko I. Influence of Spray Nozzle Operating Parameters on the Fogging Process Implemented to Prevent the Spread of SARS-CoV-2 Virus. Energies. 2021; 14(14):4280. https://doi.org/10.3390/en14144280
Abstract This article reports the results of a study into the effect of operating parameters on the occurrence and course of gas–liquid two-phase phenomena during the fogging process carried out with the use of a conical pressure-swirl nozzle. Four alternatives of the stub regulation angles and four values of pressure of air supply to the nozzle were tested as part of the current research. The range of the investigated variables was common for the operation of fumigators used to prevent the spread of SARS-CoV-2 virus. The liquid flow rate (weighting method), the field of velocity, and turbulent flow intensity factor, as well as velocity profiles over the section of 1 m from the nozzle were determined using the particle image velocimetry (PIV) technique. The obtained results were correlated with the measurements of the diameters of spray droplets using the laser light scattering (LLS) technique. On the basis of this research, a dependence between the nozzle parameters and the spray cone pattern was identified in terms of dynamics and droplet diameter distribution. As a result of the research, a wide range of parameters were identified in which the fogging process was carried out in a stable and repeatable manner. There were exceptions to this rule only in the cases when there was a deficiency of the liquid necessary to generate a two-phase mixture.
Appears in Collections: Наукові видання (ТеСЕТ)

Views

France France
1
Germany Germany
126170
Ireland Ireland
66124
Japan Japan
1
Lithuania Lithuania
1
Mongolia Mongolia
1
Netherlands Netherlands
205
Singapore Singapore
1
Sweden Sweden
1
Ukraine Ukraine
1563496
United Kingdom United Kingdom
463490
United States United States
9785369
Unknown Country Unknown Country
12004863
Vietnam Vietnam
1

Downloads

Australia Australia
1
Brazil Brazil
1
Colombia Colombia
1
France France
1
Germany Germany
2059
Lithuania Lithuania
1
Malta Malta
1
South Korea South Korea
1
Ukraine Ukraine
3126894
United Arab Emirates United Arab Emirates
1
United Kingdom United Kingdom
1
United States United States
12004861
Vietnam Vietnam
1

Files

File Size Format Downloads
Fedak_et.al_Influence_of_Spray_energies_2021.pdf 28.24 MB Adobe PDF 15133824

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.