Please use this identifier to cite or link to this item: https://essuir.sumdu.edu.ua/handle/123456789/87578
Or use following links to share this resource in social networks: Recommend this item
Title Analysis of the Quality of Sulfomolybdenum Coatings Obtained by Electrospark Alloying Methods
Authors Haponova, Oksana Petrivna  
Antoszewski, B.
Tarelnyk, V.B.
Kurp, P.
Myslyvchenko, O.M.
Tarelnyk, N.V.
ORCID http://orcid.org/0000-0002-4866-0599
Keywords electrospark alloying
sulfomolybdenum coatings
tribology
Type Article
Date of Issue 2021
URI https://essuir.sumdu.edu.ua/handle/123456789/87578
Publisher MDPI
License Creative Commons Attribution 4.0 International License
Citation Gaponova, O.P.; Antoszewski, B.; Tarelnyk, V.B.; Kurp, P.; Myslyvchenko, O.M.; Tarelnyk, N.V. Analysis of the Quality of Sulfomolybdenum Coatings Obtained by Electrospark Alloying Methods. Materials 2021, 14, 6332. https://doi.org/10.3390/ma14216332
Abstract The authors of this paper have attempted to improve the quality of surface layers applied to steel elements of machine parts constituting friction couples. The main goal of the research was to investigate an electrospark alloying method process for obtaining abrasion-resistant tribological coatings containing molybdenum disulfide on a steel surface. A substance in the form of sulfur ointment with a sulfur content of 33.3% was applied on the surfaces of C22 and C40 steel specimens. In order to determine the influence of the energy parameters of ESA equipment on the quality parameters of coatings, the ESA process was carried out using a molybdenum electrode with discharge energies Wp = 0.13; Wp = 0.55; Wp = 3.4 J. The following tests were carried out on specimens with such coatings: metallographic analysis, microhardness tests, surface roughness, and local X-ray diffraction microanalysis. The experiments revealed that sulfomolybdenum coatings consist of four zones with different mechanical properties. Depending on the discharge energy and the substrate material, the hardness of these zones varies from approx. 1100 to over 10,000 MPa. Differences in the distribution of, among others, sulfur and molybdenum in the obtained coatings, as well as differences in the microstructure of the observed coatings, were observed.
Appears in Collections: Наукові видання (ТеСЕТ)

Views

Australia Australia
1
China China
1136673418
Côte d’Ivoire Côte d’Ivoire
1
Finland Finland
383692272
Germany Germany
1
Greece Greece
452
Ireland Ireland
117521
Latvia Latvia
1
Lithuania Lithuania
1
Singapore Singapore
1136673423
Sweden Sweden
1
Ukraine Ukraine
1770736
United Kingdom United Kingdom
826041
United States United States
-435495979
Unknown Country Unknown Country
-2007665386
Vietnam Vietnam
450

Downloads

China China
1136673419
Germany Germany
1136673414
Ireland Ireland
1
Italy Italy
1
Lithuania Lithuania
1
Singapore Singapore
1136673424
Ukraine Ukraine
1770737
United Arab Emirates United Arab Emirates
1
United Kingdom United Kingdom
826042
United States United States
1136673421
Vietnam Vietnam
1

Files

File Size Format Downloads
Haponova_et_al_Sulfomolybdenum_Coatings_2021.pdf 6.84 MB Adobe PDF 254323166

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.