Comparison of sorption efficiency of natural and MnO2 coated zeolite for copper removal from model solutions

Please use this identifier to cite or link to this item: https://essuir.sumdu.edu.ua/handle/123456789/87600

Or use following links to share this resource in social networks: Recommend this item

Title	Comparison of sorption efficiency of natural and MnO2 coated zeolite for copper removal from model solutions
Authors	Balintova, M. Kovacova, Z. Demcak, S. Chernysh, Yelyzaveta Yuriivna Junakova, N.
ORCID	http://orcid.org/0000-0003-4103-4306
Keywords	MnO2 coated zeolite synthetic solutions
Type	Article
Date of Issue	2021
URI	https://essuir.sumdu.edu.ua/handle/123456789/87600
Publisher	IOP Publishing
License	Creative Commons Attribution 4.0 International License
Citation	M Balintova et al. Comparison of sorption efficiency of natural and MnO2 coated zeolite for copper removal from model solutions. 2021 IOP Conf. Ser.: Earth Environ. Sci. 900 012003
Abstract	Removal of heavy metals from the environment is important for living beings. The present work investigates the applicability of the natural and MnO2 - coated zeolite as sorbent for the removal of copper from synthetic solutions. Batch experiments were carried out to identify the influence of initial pH and concentration in the process of adsorption. A maximum removal efficiency of Cu(II) was observed in 10 mg/L for natural (95.6%) and modified (96.4%) zeolite, where the values was almost identical, but at concentration of 500 mg/L was the removal efficiency of modified zeolite three times higher. Based on the correlation factors R2, the Langmuir isotherms better describe the decontamination process than Freundlich. The optimum pH value was set at 5.0.
Appears in Collections:	Наукові видання (ТеСЕТ)