Please use this identifier to cite or link to this item:
https://essuir.sumdu.edu.ua/handle/123456789/87895
Or use following links to share this resource in social networks:
Tweet
Recommend this item
Title | Modeling and Optimization of Properties of the Environmentally Clean Molds Based on Oligofurfuryloxysiloxanes for the Production the Metal Castings |
Authors |
Ponomarenko, O.
Yevtushenko, N. Berladir, Khrystyna Volodymyrivna Zapolovskyi, M. Krmela, J. Krmelovа, V. Artiukhov, Artem Yevhenovych |
ORCID |
http://orcid.org/0000-0002-4287-8204 http://orcid.org/0000-0003-1112-6891 |
Keywords |
cold hardening polymer composition oligofurfuryloxysiloxanes catalyst strength survivability computational modeling mathematical dependencies energy efficiency |
Type | Article |
Date of Issue | 2022 |
URI | https://essuir.sumdu.edu.ua/handle/123456789/87895 |
Publisher | MDPI |
License | Creative Commons Attribution 4.0 International License |
Citation | Ponomarenko, O.; Yevtushenko, N.; Berladir, K.; Zapolovskyi, M.; Krmela, J.; Krmelová, V.; Artyukhov, A. Modeling and Optimization of Properties of the Environmentally Clean Molds Based on Oligofurfuryloxysiloxanes for the Production the Metal Castings. Polymers 2022, 14, 1883. https://doi.org/10.3390/polym14091883 |
Abstract |
This article is devoted to modeling, researching and optimizing the main properties of an environmentally clean polymer composition based on oligofurfuryloxysiloxanes (OFOS), which can be used to produce casting molds and cores in the production of castings from ferrous and nonferrous metals. Polymer compositions were examined for strength, survivability, gas permeability, moisture, crumbliness, fire resistance, knockout, and stickability. It has been established that the increase in the strength of the polymer composition over time obeys an exponential law. Mathematical equations were derived for all the exponential curves. The indications of compressive strength of the polymer composition with OFOS with all the acid catalysts used were, on average, as follows: after 1 h—1.3–1.54 MPa; after 3 h—2.5–2.9 MPa; after 24 h—4.9–6.1 MPa, which meets the requirements for casting molds before pouring with metal. The use of polymer compositions with OFOS ensures environmental safety of the technological process, due to the lack of emission of toxic substances, both in the “cold” stage of the process and during casting with molten metal, cooling, knocking out, and disposal of polymer compositions. This makes it possible to save energy resources, and thereby reduce the total cost of the entire technological process and castings. |
Appears in Collections: |
Наукові видання (ТеСЕТ) |
Views
Germany
1
Ireland
2831
Japan
1
Singapore
1
Ukraine
141266
United Kingdom
4993
United States
272547
Unknown Country
853344
Vietnam
38
Downloads
Canada
1
China
1
Germany
29923
Ireland
1
South Africa
1
Ukraine
29921
United Arab Emirates
1
United States
141267
Vietnam
1
Files
File | Size | Format | Downloads |
---|---|---|---|
polymers-14-01883.pdf | 2.54 MB | Adobe PDF | 201117 |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.