Deposition and Characterization of NiCoCrAlY Coatings by Multi-chamber Detonation Sprayer

Please use this identifier to cite or link to this item: http://essuir.sumdu.edu.ua/handle/123456789/37215

Or use following links to share this resource in social networks: Recommend this item

Title	Deposition and Characterization of NiCoCrAlY Coatings by Multi-chamber Detonation Sprayer
Authors	Kovaleva, M.G. Tyurin, Y.N. Arseenko, M.Y. Prozorova, M.S. Sirota, V.V. Beresnev, B.M. Pavlenko, I.A. Mamunin, K.N.
Keywords	Detonation Sprayer Powder Coating Microstructure Porosity hardness
Type	Article
Date of Issue	2014
URI	http://essuir.sumdu.edu.ua/handle/123456789/37215
Publisher	Sumy State University
License
Citation	Proc. NAP 3, 02NNSA12 (2014)
Abstract	In this study, multi-chamber detonation sprayer (MCDS) was applied for deposition of NiCoCrAlY powder coatings (60-65 mm thick) on nickel base superalloy JS6U (Russia). Powder RPCoCr27Al7Si3Y was used to deposit of a coating. The coating microstructures and phase compositions were characterized using SEM, OM and XRD techniques. Measurement of the microhardness of samples was done with a micro-hardness tester DM – 8B using a Vickers’s indenter with load on of 0.01 N. It was established that MCDS has provided the conditions for formation of a dense layer with porosity below 1% and microhardness of 1100 ± 250 HV0.1.
Appears in Collections:	Наукові видання (ЕлІТ)