Please use this identifier to cite or link to this item: http://essuir.sumdu.edu.ua/handle/123456789/66382
Full metadata record
DC FieldValueLanguage
dc.contributor.authorЯновська, Ганна Олександрівна-
dc.contributor.authorЯновская, Анна Александровна-
dc.contributor.authorYanovska, Hanna Oleksandrivna-
dc.contributor.authorБольшаніна, Світлана Борисівна-
dc.contributor.authorБольшанина, Светлана Борисовна-
dc.contributor.authorBolshanina, Svitlana Borysivna-
dc.contributor.authorKuznetsov, V.M.-
dc.date.accessioned2018-02-02T09:26:22Z-
dc.date.available2018-02-02T09:26:22Z-
dc.date.issued2017-
dc.identifier.citationYanovska, G.O. Formation of hydroxyapatite coatings with addition of chitosan from aqueous solutions by thermal substrate method [Текст] / G.O. Yanovska, S.B. Bolshanina, V.M. Kuznetsov // Журнал інженерних наук. – 2017. – Т. 4, № 2. – С. F1-F4. – DOI: 10.21272/jes.2017.4(2).f1.ru_RU
dc.identifier.urihttp://essuir.sumdu.edu.ua/handle/123456789/66382-
dc.description.abstractThe aim of this investigation was obtaining of biocompatible coatings for medical implants based on biopolymer chitosan and hydroxyapatite, which is the main mineral component of bone tissue. Coatings were obtained by thermal substrate method, because it allows low temperature deposition and provides possibility to incorporate into coating structure biomolecules, unstable at high temperatures. As a way of chitosan incorporation into coating composition co-precipitation method was proposed. It allows obtaining uniform coatings with required composition and morphology. The obtained coatings were investigated by using of XRD, SEM with EDS, adhesion was tested by test-tape method. It was assigned that chitosan addition decreased hydroxyapatite crystallinity, so the range of concentrations from 0.01 to 0.1 g/L was chosen at pH = 6.5. It was determined that variation of chitosan concentrations in the initial solution influenced on morphology and structure of hydroxyapatite coatings as well as on the antibacterial properties and the use in orthopedics and dentistry. The best characteristics were obtained for hydroxyapatite-chitosan coatings deposited from solution with chitosan concentration 0.025 g/L.ru_RU
dc.language.isoenru_RU
dc.publisherSumy State Universityru_RU
dc.subjecthydroxyapatiteru_RU
dc.subjectchitosanru_RU
dc.subjectcoatingru_RU
dc.subjectdepositionru_RU
dc.subjectthermal substrate methodru_RU
dc.titleFormation of hydroxyapatite coatings with addition of chitosan from aqueous solutions by thermal substrate methodru_RU
dc.typeArticleru_RU
Appears in Collections:Журнал інженерних наук

Files in This Item:
File Description SizeFormatDownloads 
Yanovska_Bolshanina_Kuznetsov_JES_2017_4_2_F1-F4.pdf233.39 kBAdobe PDF0Download


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.