Наукові роботи студентів, магістрів, аспірантів (ЕлІТ)
Permanent URI for this collectionhttps://devessuir.sumdu.edu.ua/handle/123456789/150
Browse
5 results
Search Results
Item Characterization Cupper Oxide thin films(Львівський національний університет ім. Івана Франка, 2015) Д`яченко, Олексій Вікторович; Дьяченко, Алексей Викторович; Diachenko, Oleksii Viktorovych; Опанасюк, Анатолій Сергійович; Опанасюк, Анатолий Сергеевич; Opanasiuk, Anatolii Serhiiovych; Nam, D.; Cheong, H.For obtaining of the CuO thin films have used spray pyrolysis method. Glass plates were cleaned in ultrasonic bath and washed with ethanol, used as a substrates. We used an aqueous solution of copper chloride (CuCl22H2O) with a concentration of 0.05 M as a precursor. The substrate temperature range from 570 to 720 K, with step Т=50 K. For atomization of precursor the air flow with a pressure of 0.25 MPa was used.Item Оптичні властивості плівок ZnxCd1-xS, отриманих методом вакуумного випаровування(ПП Щербатих О.В. (Дніпропетровський національний університет імені Олеся Гончара), 2016) Єрьоменко, Юрій Сергійович; Еременко, Юрий Сергеевич; Yeromenko, Yurii Serhiiovych; Возний, Андрій Андрійович; Возный, Андрей Андреевич; Voznyi, Andrii Andriiovych; Опанасюк, Анатолій Сергійович; Опанасюк, Анатолий Сергеевич; Opanasiuk, Anatolii SerhiiovychВ даній роботі досліджувався вплив концентрації цинку x на оптичні властивості (спектри пропускання, відбивання та ін.) плівок твердого розчину ZnxCd1-xS, отриманих методом вакуумного випаровування у КЗО.Item Raman spectroscopy of nanocrystalline Cu2ZnSnS4 thin films obtained by pulsed spray pyrolysis(Львівський національний університет ім. Івана Франка, 2015) Доброжан, Олександр Анатолійович; Доброжан, Александр Анатольевич; Dobrozhan, Oleksandr Anatoliiovych; Опанасюк, Анатолій Сергійович; Опанасюк, Анатолий Сергеевич; Opanasiuk, Anatolii Serhiiovych; Cheong, H.; Nam, D.The sprayed CZTS thin films were deposited using an aqueous solution containing CuCl2·2H2O (0.02 M), ZnCl2 (0.01 M), SnCl2·2H2O (0.015 M) and SC(NH2)2 (0.1 M) at the temperature substrate of 400 0C with the different values of starting solution volume per sample (2 ml, 3 ml, 4 ml, 5 ml).Item Post-growth treatment of SnxSy thin films(E-MRS (European Materials Research Society), 2016) Косяк, Володимир Володимирович; Косяк, Владимир Владимирович; Kosiak, Volodymyr Volodymyrovych; Возний, Андрій Петрович; Возный, Андрей Петрович; Voznyi, Andrii Petrovych; Onufrijevs, P.; Grase, L.; Vecstaudža, J.; Опанасюк, Анатолій Сергійович; Опанасюк, Анатолий Сергеевич; Opanasiuk, Anatolii Serhiiovych; Medvids, A.; Mezinskis, G.In this study, the effect of post-growth thermal annealing and laser irradiation on phase composition, structural, optical and electrical properties of SnS2 obtained by the close-spaced sublimation on ITO substrates was studied. It was found, by using EDS, XRD and Raman methods that as-grown samples have single phase SnS2 structure and their chemical composition is close to stoichiometric.Item Thermally induced phase transition in SnxSy thin films(E-MRS (European Materials Research Society), 2016) Возний, Андрій Андрійович; Возный, Андрей Андреевич; Voznyi, Andrii Andriiovych; Косяк, Володимир Володимирович; Косяк, Владимир Владимирович; Kosiak, Volodymyr VolodymyrovychPresently, the earth-abundant and non-toxic SnS2 and SnS compounds could be considered as the promising optoelectronic material. This is due the fact that SnS2 has n-type conductivity, high carrier mobility and wide band gap of 2.2 eV. SnS2 films were obtained by the close-spaced vacuum sublimation method.