Видання зареєстровані авторами шляхом самоархівування
Permanent URI for this communityhttps://devessuir.sumdu.edu.ua/handle/123456789/1
Browse
4 results
Search Results
Item Властивості поверхонь деталів із криці 12Х18Н10Т, які працюють в умовах радіяційного опромінювання, відновлених методою електроіскрового леґування. Ч. 2. Особливості структурного стану відновлених поверхонь(Інститут металофізики ім. Г. В. Курдюмова НАН України, 2022) Гапонова, Оксана Петрівна; Haponova, Oksana Petrivna; Тарельник, Наталія В'ячеславівна; Tarelnyk, Nataliia ViacheslavivnaВ статті представлено результати досліджень структурного стану покрит-тів, сформованих методою електроіскрового леґування при енергії розря-ду Wр = 0,13, 0,52 і 0,9 Дж анодами з ніклю та неіржавійної криці 12Х18Н10Т на поверхні катоди із криці 12Х18Н10Т. Матеріяли анод, та-кі як нікель і криця 12Х18Н10Т, належать до матеріялів якими доцільно відновлювати поверхні деталів із криці 12Х18Н10Т, які працюють в умо-вах радіяційного опромінювання. Металографічна аналіза, сформованих покриттів показала, що їх мікроструктура складається із 3-х зон: 1) «бі-лий» шар — шар, що не піддається травленню звичайними реактивами, 2) перехідна зона або дифузійна зона, 3) основний метал. При викорис-танні в якості електроди-інструменту ніклю і криці 12Х18Н10Т зі збіль-шенням енергії розряду товщина зміцненого шару, мікротвердість, суцільність і товщина «білого» шару, а також величина шерсткости повер-хні збільшуються. Заміна аноди ніклю на крицю 12Х18Н10Т приводить до збільшення шерсткости поверхні і зменшення товщини зміцненого шару.Item Властивості поверхонь деталів із криці 12Х18Н10Т, які працюють в умовах радіяційного опромінювання, відновлених методою електроіскрового леґування. Ч. 3. Рентґеноспектральна аналіза відновлених покриттів(Інститут металофізики ім. Г. В. Курдюмова НАН України, 2022) Тарельник, В`ячеслав Борисович; Tarelnyk, Viacheslav Borysovych; Гапонова, Оксана Петрівна; Haponova, Oksana Petrivna; Коноплянченко, Є.В.; Тарельник, Наталія В'ячеславівна; Tarelnyk, Nataliia Viacheslavivna; Мікуліна, М.О.; Герасименко, В.О.; Василенко, О.О.; Зубко, В.М.; Мельник, В.І.В статті представлено результати локальної рентґеноспектральної аналі-зи покриттів, що одержані методою електроіскрового леґування (ЕІЛ) при енергії розряду Wр = 0,13, 0,52 і 0,9 Дж анодами з ніклю і неіржавійної криці 12Х18Н10Т на поверхні катоди із криці 12Х18Н10Т. При ЕІЛ електродою-інструментом із криці 12Х18Н10Т зі збільшенням Wр як в хара-ктерних точках, так і зі всієї дослідженої поверхні покриття, кількісний елементний склад суттєво не змінюється. Аналіза розподілу елементів по глибині сформованого шару показала, що при використанні в якості еле-ктроди-інструменту криці 12Х18Н10Т, зі збільшенням Wр в поверхнево-му шарі відбувається незначне зменшення вмісту Хрому і збільшення Ні-клю та Титану. При заміні криці 12Х18Н10Т на нікель зі збільшенням Wр кількість Ніклю на поверхні покриття зменшується з 95,38 до 89,04%. По мірі поглиблення з поверхні покриття кількість Ніклю пос-тупово зменшується, відповідно при Wр = 0,13, 0,52 і 0,9 Дж з 96,29, 90,29 і 89,04% на поверхні до 9,0, 10,30 і 9,9% на глибині: 120, 165 і 240 мкм. При цьому кількість Хрому, Титану та Феруму поступово збі-льшується.Item Method of Using the Correlation between the Surface Roughness of Metallic Materials and the Sound Generated during the Controlled Machining Process(MDPI, 2022) Нагорний, Володимир В`ячеславович; Нагорный, Владимир Вячеславович; Nahornyi, Volodymyr Viacheslavovych; Panda, A.; Valicek, J.; Harnicarova, M.; Kusnerova, M.; Pandova, I.; Legutko, S.; Palkova, Z.; Lukac, O.The article aims to use the generated sound as operational information needed for adaptive control of the metalworking process and early monitoring and diagnosis of the condition of the machined materials using a newly introduced surface roughness quality index due to the sound-controlled machining process. The object of the measurement was correlation between the sound intensity generated during cutting and the material parameters of the machined surface, i.e., the roughness of the machined surface and the degree of wear of the cutting tool. The roughness was measured during longitudinal turning of a steel billet with a P25 insert made of 12X18H10T steel and a T15K6 cutting insert made of a titanium, cobalt, and tungsten group alloy. The correlation between the sound and roughness of the machined surface was 0.93, whereas between the sound and wear of the cutting tool was 0.93. The correlation between sound and tool wear in the experiment with P25 and T15K6 cutting inserts and the correlation between sound and roughness is positive.Item Simulation of Diffusion Processes in Chemical and Thermal Processing of Machine Parts(MDPI, 2021) Kostyk, K.; Hatala, H.; Kostyk, V.; Іванов, Віталій Олександрович; Иванов, Виталий Александрович; Ivanov, Vitalii Oleksandrovych; Павленко, Іван Володимирович; Павленко, Иван Владимирович; Pavlenko, Ivan Volodymyrovych; Duplakova, D.To solve a number of technological issues, it is advisable to use mathematical modeling, which will allow us to obtain the dependences of the influence of the technological parameters of chemical and thermal treatment processes on forming the depth of the diffusion layers of steels and alloys. The paper presents mathematical modeling of diffusion processes based on the existing chemical and thermal treatment of steel parts. Mathematical modeling is considered on the example of 38Cr2MoAl steel after gas nitriding. The gas nitriding technology was carried out at different temperatures for a duration of 20, 50, and 80 h in the SSHAM-12.12/7 electric furnace. When modeling the diffusion processes of surface hardening of parts in general, providing a specifically given distribution of nitrogen concentration over the diffusion layer’s depth from the product’s surface was solved. The model of the diffusion stage is used under the following assumptions: The diffusion coefficient of the saturating element primarily depends on temperature changes; the metal surface is instantly saturated to equilibrium concentrations with the saturating atmosphere; the surface layer and the entire product are heated unevenly, that is, the product temperature is a function of time and coordinates. Having satisfied the limit, initial, and boundary conditions, the temperature distribution equations over the diffusion layer’s depth were obtained. The final determination of the temperature was solved by an iterative method. Mathematical modeling allowed us to get functional dependencies for calculating the temperature distribution over the depth of the layer and studying the influence of various factors on the body’s temperature state of the body.