Факультет технічних систем і енергоефективних технологій (ТеСЕТ)
Permanent URI for this communityhttps://devessuir.sumdu.edu.ua/handle/123456789/25
Browse
43 results
Search Results
Item Financing the fixed assets reproduction of woodworking enterprises: innovation and investment aspect(Limited Liability Company “FINTECHALLIANCE”., 2022) Shuplat, O.; Shevchenko, V.; Lutsiv, N.; Некрасов, Сергій Сергійович; Некрасов, Сергей Сергеевич; Nekrasov, Serhii Serhiiovych; Hovda, H.The current market economy implies that the search for effective sources of financing the fixed assets reproduction is one of the key tasks in managing the fixed capital of the economic entity. In the changing external environment, modernized equipment of enterprises provides an opportunity to carry out innovative activities, as well as to implement investment projects. The aim of the research was to outline a modern approach to financing the reproduction of fixed assets based on the identification of the relationship between investments and innovations in this process. The research involved the following methods: analysis and synthesis to determine trends in the dynamics of capital investment in Ukraine and the Republic of Poland; regression analysis to forecast the capital investment volume in Ukraine and the Republic of Poland; the internal rate of return to evaluate the effectiveness of the innovation and investment project of a woodworking enterprise. Capital investment volumes in Ukraine and Poland are determined. The 2025 capital investment volume is projected at $8.02 billion in Ukraine (provided a stable rate of further economic decline), and at $110.2 billion in the Republic of Poland. The strategic priorities for the development of woodworking enterprises are outlined: the production of innovative products; implementation of effective solutions for products and markets provided full implementation of innovation and investment strategy; focus on current market needs; ensuring a minimum degree of risk with maximum control of the innovation and investment project; achieving a short-term return on investment with maximum liquidity of the project and the implementation of innovation and investment strategy. An innovation and investment project were developed for the production re-equipment to create an innovative model of interior doors, and its economic justification was carried out.Item Mathematical estimation of roughness Rz of threaded surface obtained by machining method(MM Publishing, 2022) Некрасов, Сергій Сергійович; Некрасов, Сергей Сергеевич; Nekrasov, Serhii Serhiiovych; Peterka, J.; Жигилій, Дмитро Олексійович; Жигилий, Дмитрий Алексеевич; Zhyhylii, Dmytro Oleksiiovych; Довгополов, Андрій Юрійович; Довгополов, Андрей Юрьевич; Dovhopolov, Andrii Yuriiovych; Колесник, Віталій Олександрович; Колесник, Виталий Александрович; Kolesnyk, Vitalii OleksandrovychThe paper presents a mathematical model of the helical surface roughness Rz, obtained by the form-generating method with a to-size tool with a standard profile of cutting tool inserts. This machining method has maximum productivity with large pitches of the helix. The surface roughness of the auger flight is an important parameter since it works in a friction pair with an elastic element. The resulting dependence makes it possible to predict surface roughness in any of its sections, considering the helix curvature, depending on the feed and the cutting tool tip radius. The obtained dependence allows comparing the numerical solution with the linearized one obtained by finding the minimum distance from the intersection points of the tool edge circles at helical surface adjacent cutting points to the straight line connecting these adjacent points.Item Applying Case Method in the Training of Future Specialists(Sciedu Press, 2022) Chumak, M.; Некрасов, Сергій Сергійович; Некрасов, Сергей Сергеевич; Nekrasov, Serhii Serhiiovych; Hrychanyk, N.; Prylypko, V.; Mykhalchuk, V.Making a brighter presentation and improving assimilation of educational material with the help of the case method allows activating the mental, exploratory and creative abilities of students to optimize the process of assimilation of information. The combination of this method with others allows making future specialists to independently find ways to solve problems. This results in the assimilation of professionally significant special knowledge. The aim of the study was to determine the features of the application of the case method in the educational process in preparing students for future professional activities, identifying sources, structural elements and filling professional cases. The study involved the survey method and further testing to identify indicators of significance at the summative and control stage of the experiment. Methods used: diagnostic programme to study the level of educational activities by Riepkina, Zaika; assessment of the level of control and self-assessment actions; statistical and mathematical interpretation of empirical data with subsequent functional analysis of the research results. The study showed the high efficiency of the case method in the educational environment of higher educational institutions (HEIs). The indicator of students’ self-presentation after the application of the case method has changed significantly. This was reflected in an increased high level to 35.5%, a decreased medium level to 38%, and a slight increase in all levels in the experimental group students. Positive dynamics was revealed on all criteria for diagnosing the effectiveness of the case method in teaching: a decreased percentage of students with negative and relatively low markers and a corresponding increase in the percentage of students with positive markers of knowledge and learning the material. Further research can deal with development and implementation of case systems in view of certain majors, taking into account future professional activities.Item Determination of rational conditions for oil extraction from oil hydration waste(РС ТЕСHNOLOGY СЕNTЕR, 2022) Bliznjuk, O.; Masalitina, N.; Myronenko, L.; Zhulinska, O.; Denisenko, T.; Некрасов, Сергій Сергійович; Некрасов, Сергей Сергеевич; Nekrasov, Serhii Serhiiovych; Stankevych, S.; Bragin, O.; Romanov, O.; Romanova, T.As a result of oil hydration, waste is formed – phosphatide concentrate, which is a multicomponent system. Valuable components of the concentrate are vegetable oil and phosphatides, the separation of which is an urgent task for the industry. The process of treatment of sunflower phosphatide concentrate with citric acid (hydration) in order to more completely convert non-hydrated forms of phosphatides into hydrated ones and separate the oil from the concentrate was studied. A feature of the work is the study of the dependence of the yield and mass fraction of moisture in the extracted oil on the hydration process parameters. A sample of phosphatide concentrate with non-standard quality indicators according to SOU 15.4-37-212:2004 (CAS 3436-44-0) was studied: the mass fraction of moisture and volatile substances was 4.0 %, the mass fraction of phosphatides was 37.0 %. The concentrate was treated with citric acid solution at a temperature of 45 °C (10 % solution). Rational conditions for concentrate treatment were determined: duration (25 min) and citric acid concentration in relation to the mass of phosphatide concentrate (25 %). Under these conditions, the oil yield was 76.1 %, the mass fraction of moisture in the oil was 18.6 %. The indicators characterizing the suitability of the oil for consumption and its safety for the body are within the limits (acid value 3.7 mg KOH/g, peroxide value 5.1 ½ O mmol/kg) for the first-grade unrefined unwinterized sunflower oil according to DSTU 4492. Such oil can be used for refining, fatty acids and biodiesel production, and after additional purification – for processing into food products. The results of the study make it possible to use resources rationally and predict the yield and quality of the oil isolated from the phosphatide concentrate. The resulting oil can be an affordable raw material for various industries.Item Modeling of a Stress-Strain State of Detachable Connection in Details of Reinforced Composite Materials with Cea Method(Sciendo, 2020) Довгополов, Андрій Юрійович; Довгополов, Андрей Юрьевич; Dovhopolov, Andrii Yuriiovych; Некрасов, Сергій Сергійович; Некрасов, Сергей Сергеевич; Nekrasov, Serhii Serhiiovych; Жигилій, Дмитро Олексійович; Жигилий, Дмитрий Алексеевич; Zhyhylii, Dmytro Oleksiiovych; Савченко, Євген Миколайович; Савченко, Евгений Николаевич; Savchenko, Yevhen Mykolaiovych; Ступін, Борис Анатолійович; Ступин, Борис Анатольевич; Stupin, Borys AnatoliiovychIn order to study the strength of the proposed rope threaded joint for machine parts made of reinforced composite materials, a modeling of a stress-strain state was conducted using the software of finite-element analysis LS-DYNA. Stress-strain state modeling was conducted for a rope threaded joint, affecting on the main performance parameters considered to be p – thread pitch (p = 4 mm), and t – thread depth (t = 1 mm). The main thread parameters taken for the model were up to the metric thread М6 (ISO 724:1993) parameters.Item Технологія обробки роз’ємного з’єднання в деталях з армованих композиційних матеріалів(Сумський державний університет, 2018) Довгополов, Андрій Юрійович; Довгополов, Андрей Юрьевич; Dovhopolov, Andrii Yuriiovych; Некрасов, Сергій Сергійович; Некрасов, Сергей Сергеевич; Nekrasov, Serhii SerhiiovychНа основі проведеного експериментального дослідження було встановлено, що перевагою даного способу також є те, що обробка різьбової поверхні відбувається за один прохід, що зменшує час обробки, а отже і час контакту ріжучої кромки з АКМ також зменшується.Item Технологія обробки роз'ємного з'єднання в деталях з армованих композиційних матеріалів(Сумський державний університет, 2017) Довгополов, Андрій Юрійович; Довгополов, Андрей Юрьевич; Dovhopolov, Andrii Yuriiovych; Некрасов, Сергій Сергійович; Некрасов, Сергей Сергеевич; Nekrasov, Serhii SerhiiovychСучасні підприємства виготовляють продукцію цивільного і спеціального призначення для авіаційної і ракетно-космічної галузі. Розвиток цієї наукомісткої техніки нерозривно пов'язаний з розробкою нових конструктивних рішень, прогресивних технологій, вдосконаленням існуючих або створенням нових матеріалів. Серед нових матеріалів останнім часом велика увага приділяється армованим композиційним матеріалам (АКМ), що володіють унікальними властивостями. Найпоширенішими АКМ вважаються вуглепластик та склопластик, завдяки своїм високим показникам міцності, порівняно невисокою ціною матеріалу та досить невеликою масою.Item Підвищення ККД черв'ячної передачі(Сумський державний університет, 2017) Васянович, С.О.; Некрасов, Сергій Сергійович; Некрасов, Сергей Сергеевич; Nekrasov, Serhii SerhiiovychНайпоширенішим способом передачі енергії обертанням є зубчасті передачі. Зубчасті передачі використовуються людством з давних давен.Item Технологія обробки круглої зовнішньої різьби(Сумський державний університет, 2017) Довгополов, Андрій Юрійович; Довгополов, Андрей Юрьевич; Dovhopolov, Andrii Yuriiovych; Некрасов, Сергій Сергійович; Некрасов, Сергей Сергеевич; Nekrasov, Serhii Serhiiovych; Агеєва, Є.А.У вітчизняній і зарубіжній гірничодобувній промисловості широко використовується буровий інструмент, кріплення якого здійснюється за допомогою круглої різьби. Використання такого різьбового з’єднання обумовлене високим терміном служби і підвищеним опором динамічним навантаженням, характерним для ударного буріння. Крім того, кругла різьба добре працює в умовах забрудненої різьбової поверхні. Круглу різьбу нарізають на виробах, що експлуатуються у важких умовах.Item Универсальный патрон для зажима тонкостенных деталей(Сумский государственный университет, 2016) Довгополов, Андрій Юрійович; Довгополов, Андрей Юрьевич; Dovhopolov, Andrii Yuriiovych; Некрасов, Сергій Сергійович; Некрасов, Сергей Сергеевич; Nekrasov, Serhii SerhiiovychВ машиностроении, авиастроении, приборостроении, и других отраслях машиностроения, распространённым видом изделий являются нежёсткие тонкостенные детали, такие как гильзы блоков цилиндров. Обработка таких деталей связана с рядом сложностей, одна из которых – деформация детали при закреплении ее на станке. Деформации влияют на точность детали после обработки.