Факультет електроніки та інформаційних технологій (ЕлІТ)

Permanent URI for this communityhttps://devessuir.sumdu.edu.ua/handle/123456789/20

Browse

Search Results

Now showing 1 - 10 of 11
  • Item
    Infuence of the thermal annealing on the morphological and structural propertie
    (Springer Nature, 2020) Доброжан, Олександр Анатолійович; Доброжан, Александр Анатольевич; Dobrozhan, Oleksandr Anatoliiovych; Пшеничний, Роман Миколайович; Пшеничный, Роман Николаевич; Pshenychnyi, Roman Mykolaiovych; Vorobiov, S.; Курбатов, Денис Ігорович; Курбатов, Денис Игоревич; Kurbatov, Denys Ihorovych; Komanicky, V.; Опанасюк, Анатолій Сергійович; Опанасюк, Анатолий Сергеевич; Opanasiuk, Anatolii Serhiiovych
    In this work, ZnO flms were deposited onto fexible polyimide substrates by ink-jet printing nanoinks containing polyolsynthesized nanocrystals. ZnO flms were annealed at 200–400 °C for 10 min and 60 min under the ambient atmosphere. The morphological (shape, size, size distribution, surface roughness), structural (phase composition, crystal structure), optical (band gap, transmission coefcients) properties and the chemical composition of the synthesized nanocrystals and the obtained flms were studied. X-ray difraction analysis, transmission and scanning electron microscopies, atomic force microscopy, Fourier-transform infrared (FTIR) and optical spectroscopies, and energy-dispersive X-ray spectroscopy (EDS) were used to study the properties of obtained ZnO materials. The flms, annealed at Ta=400 °C for ta=60 min, and nanocrystals, synthesized for tg=120 min, have the good fundamental characteristics for application in the microelectronic devices, especially in solar cells and thermoelectric generators.
  • Item
    Cu2ZnSnS4, Cu2ZnSnSe4 Nanocrystals As Absorbers In 3rd Generation Solar Cells
    (Igor Sikorsky Kyiv polytechnic institute, 2020) Кахерський, Станіслав Ігорович; Кахерский, Станислав Игоревич; Kakherskyi, Stanislav Igorevich; Доброжан, Олександр Анатолійович; Доброжан, Александр Анатольевич; Dobrozhan, Oleksandr Anatoliiovych; Пшеничний, Роман Миколайович; Пшеничный, Роман Николаевич; Pshenychnyi, Roman Mykolaiovych; Курбатов, Денис Ігорович; Курбатов, Денис Игоревич; Kurbatov, Denys Ihorovych; Опанасюк, Надія Миколаївна; Опанасюк, Надежда Николаевна; Opanasiuk, Nadiia Mykolaivna
    Наночастинки напівпровідникових сполук Cu2ZnSnS4, Cu2ZnSnSe4 були одержані за допомогою метода поліольного синтезу. Методами сканувальної мікроскопії та рентгендифрактометрії досліджені їх морфологічні і структурні властивості. Проведено порівняння особливостей росту наночастинок обох сполук. Одержані в результаті частинки були використані для створення наночорнил, що використовувались для друку поглинальних шарів сонячних перетворювачів з використанням 2d та 3d принтерів.
  • Item
    The optimization of functional layers of solar cells based on n-ZnMgO / p-CuO and n-ZnMgO / p-Cu2O heterojunctions
    (2017) Д`яченко, Олексій Вікторович; Дьяченко, Алексей Викторович; Diachenko, Oleksii Viktorovych; Опанасюк, Анатолій Сергійович; Опанасюк, Анатолий Сергеевич; Opanasiuk, Anatolii Serhiiovych; Курбатов, Денис Ігорович; Курбатов, Денис Игоревич; Kurbatov, Denys Ihorovych; Доброжан, Олександр Анатолійович; Доброжан, Александр Анатольевич; Dobrozhan, Oleksandr Anatoliiovych; Гриненко, Віталій Вікторович; Гриненко, Виталий Викторович; Hrynenko, Vitalii Viktorovych
    In this paper, we present the results of the calculations of optical losses in the solar cell layers based on n-ZnMgO / p-CuO(p-Cu2O) heterojunctions with AZO and ITO front contacts. The calculations were carried out considering of light absorption in the auxiliary layers of the device. Thus, the spectral dependencies of transmittance in the absorber layer of solar cell were defined. It is made possible to optimize the design of the solar cells based on such heterojunctions
  • Item
    Thermoelectric properties of the colloidal Bi2S3-based nanocomposites
    (Jadavpur University, 2017) Доброжан, Олександр Анатолійович; Доброжан, Александр Анатольевич; Dobrozhan, Oleksandr Anatoliiovych; Опанасюк, Анатолій Сергійович; Опанасюк, Анатолий Сергеевич; Opanasiuk, Anatolii Serhiiovych; Курбатов, Денис Ігорович; Курбатов, Денис Игоревич; Kurbatov, Denys Ihorovych; Panchal, C.J.; Suryavanshi, P.; Trivedi, U.B.; Kheraj, V.A.
    In this work we present the proof of the concept of the novel strategy to improve the thermoelectric properties of Bi2S3based nanostructured bulk materials by blending the metallic nanoinclustions with the semiconductor nanoparticles forming the nanocomposites (NCts). The obtained NCts were composed of Bi2S3nanorods (length - 100 nm and width – 10 nm) and Ag nanoparticles (diameter - 2- 3 nm) synthesized by colloidal method. The morpohology, phase and chemical composition, electrical conductivity and Seebeck coefficient of NCts were investigated by using transmission electron microscopy (TEM), X-ray diffraction, energy dispersive X-ray analysis (EDAX), 4-point probes method and static dc-method. This strategy is the perspective way to improve the conversion efficiency of others thermoelectric materials.
  • Item
    Оптичні витрати в сонячних елементах на основі гетеропереходу n-ZnS/p-CdTe
    (Сумський державний університет, 2013) Доброжан, Олександр Анатолійович; Доброжан, Александр Анатольевич; Dobrozhan, Oleksandr Anatoliiovych; Курбатов, Денис Ігорович; Курбатов, Денис Игоревич; Kurbatov, Denys Ihorovych; Кривенко, І.А.
    Метою даної роботи є визначення оптичних втрат в СЕ на основі ГП n-ZnS/p-CdTe.
  • Item
    Influence of substrate temperature on the structural and optical properties of crystalline ZnO films obtained by pulsed spray pyrolysis
    (Surface and Interface Analysis, 2015) Доброжан, Олександр Анатолійович; Доброжан, Александр Анатольевич; Dobrozhan, Oleksandr Anatoliiovych; Курбатов, Денис Ігорович; Курбатов, Денис Игоревич; Kurbatov, Denys Ihorovych; Опанасюк, Анатолій Сергійович; Опанасюк, Анатолий Сергеевич; Opanasiuk, Anatolii Serhiiovych; Хіонсік, Чеонг; Хионсик, Чеонг; Hyeonsik, Cheong; Ендрю, Кебот; Эндрю, Кебот; Andreu, Cabot
    In this work, we report on the structural and optical properties of ZnO films deposited by pulsed spray pyrolysis at relatively low temperatures, compatiblewith a large variety of substrates and processing technologies. Crystalline ZnO films were deposited onto glass substrates using zinc acetate dihydrate dissolved in distilled water with concentration of 0.2M. The temperature of the substrate was varied in the range Ts = 473–673K with ΔТ = 50 K. Effect of Ts were investigated by scanning electron microscopy, x-ray diffraction and energy dispersive x-ray, and optical spectroscopies. Also, the influence of Ts on the grain size, phase composition, texture quality, coherent scattering domain size, crystal lattice parameters, chemical composition, ransmission coefficient, and the bang gap of the ZnO films were studied. X-ray diffraction analysis revealed that films were polycrystalline with hexagonal phase and showed as preferential orientation (101) at Ts<573 K and (100) and (002) at Ts>573 K. Scanning electron microscopy (SEM) measurements showed that the substrate temperature has a strong effect on morphology of the films. Energy dispersive analysis revealed that ZnO films consisted of the non-stoichiometric compounds. Optical measurements showed ZnO films to be highly transparent in the visible region, and optical band gap is shifting from 3.18 eV to 3.30 eV.
  • Item
    Cтруктурні властивості та елементний склад плівок ZnO нанесених методом спрей-піролізу
    (Львівський національний університет ім. І.Франка, 2014) Доброжан, Олександр Анатолійович; Доброжан, Александр Анатольевич; Dobrozhan, Oleksandr Anatoliiovych; Опанасюк, Анатолій Сергійович; Опанасюк, Анатолий Сергеевич; Opanasiuk, Anatolii Serhiiovych; Курбатов, Денис Ігорович; Курбатов, Денис Игоревич; Kurbatov, Denys Ihorovych
    Оксид цинку (ZnO) – прямозонний напівпровідник n-типу провідності з широкою забороненою зоною (Eg = 3,37 еВ при T = 300 K) та великою енергією утворення екситонів (60 меВ). Оскільки ZnO не містить рідкісних елементів, він виступає альтернативою традиційним матеріалам прозорих провідних шарів ITO ((In2O3)0.9–(SnO2)0.1) та FTO (SnO2:F)) тонкоплівкових сонячних елементів. В порівнянні з іншими методами нанесення плівок оксиду цинку, спрей-піроліз є простим, відносно дешевим, безвакуумним методом нанесення шарів великою площі на підкладках з різних матеріалів. При використанні цього методу властивості тонких плівок залежать від вибору прекурсорів та фізико-технологічних умов їх нанесення. У зв’язку з цим метою даної роботи стало дослідження впливу температури підкладки на структурні властивості та елементний склад плівок ZnO нанесених методом спрей-піролізу.
  • Item
    Modeling of the basic solar cells characteristics on the basis of n-ZnS/p-CdTe and n-CdS/p-CdTe heterojunctions
    (Прикарпатський національний університет імені Василя Стефаника, 2013) Бересток, Таїсія Олександрівна; Бересток, Таисия Александровна; Berestok, Taisiia Oleksandrivna; Доброжан, Олександр Анатолійович; Доброжан, Александр Анатольевич; Dobrozhan, Oleksandr Anatoliyovych; Курбатов, Денис Ігорович; Курбатов, Денис Игоревич; Kurbatov, Denys Ihorovych; Опанасюк, Анатолій Сергійович; Опанасюк, Анатолий Сергеевич; Opanasiuk, Anatolii Serhiiovych
    In this work we used SCAPS-3200 software environment for the realistic modeling of the basic electrical characteristics (current density of short circuit (Jsc), open circuit voltage (Uoc), fill factor (FF) and efficiency (h)) of thin solar cells films with n-ZnS/p-CdTe heterojunction. When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/34071
  • Item
    Моделювання основних характеристик сонячних елементів на основі гетеропереходів n-ZnS/p-CdTe і n-CdS/p-CdTe
    (Видавничий центр НТУ «ХПІ», 2013) Опанасюк, Анатолій Сергійович; Опанасюк, Анатолий Сергеевич; Opanasiuk, Anatolii Serhiiovych; Курбатов, Денис Ігорович; Курбатов, Денис Игоревич; Kurbatov, Denys Ihorovych; Бересток, Таїсія Олександрівна; Бересток, Таисия Александровна; Berestok, Taisiia Oleksandrivna; Доброжан, Олександр Анатолійович; Доброжан, Александр Анатольевич; Dobrozhan, Oleksandr Anatoliyovych; Лопатка, Р.В.; Лопатка, Р.В.; Lopatka, R.V.
    В роботі з використанням програмного середовища SCAPS-3200 проведено моделювання темнових та світлових ВАХ, а також спектральних розподілів квантової ефективності плівкових сонячних елементів (СЕ) на основі ідеальних гетеропереходів n-ZnS/p-CdTe і n-CdS/p-CdTe. Показано, що заміна традиційного матеріалу віконного шару фотоперетворювачів CdS на більш широкозонний матеріал ZnS приводить до зростання ККД. Встановлені конструктивні параметри СЕ на основі багатошарової системи n-ZnS/p-CdTe, які забезпечують їх максимальну ефективність. Вироблені рекомендації щодо оптимізації технології створення реальних дешевих та високоефективних плівкових перетворювачів сонячної енергії. При цитуванні документа, використовуйте посилання http://essuir.sumdu.edu.ua/handle/123456789/33899
  • Item
    Optical Losses of Thin Solar Cells on the Basis of n-ZnS / p-CdTe and n-CdS / p-CdTe Heterojunctions
    (Sumy State University Publishing, 2013) Доброжан, Олександр Анатолійович; Доброжан, Александр Анатольевич; Dobrozhan, Oleksandr Anatoliyovych; Бересток, Таїсія Олександрівна; Бересток, Таисия Александровна; Berestok, Taisiia Oleksandrivna; Курбатов, Денис Ігорович; Курбатов, Денис Игоревич; Kurbatov, Denys Ihorovych; Опанасюк, Анатолій Сергійович; Опанасюк, Анатолий Сергеевич; Opanasiuk, Anatolii Serhiiovych; Опанасюк, Надія Миколаївна; Опанасюк, Надежда Николаевна; Opanasiuk, Nadiia Mykolaivna; Нефедченко, Василь Федорович; Нефедченко, Василий Федорович; Nefedchenko, Vasyl Fedorovych
    The optical reflection and absorption losses in the accessory layers of solar cells based on n-ZnS / p- CdTe and n-CdS / p-CdTe heterojunctions are defined in this work. Aluminum doped zinc oxide is used as the front conductive layer material. It is shown that the replacement of traditional window material (CdS) for a wide-one (ZnS) leads to an increase in accessory solar cells layers transmittance. When the thickness of the window layers is 50 nm, the transmittance using ZnS windows with the wavelength of 380-500 nm is higher in 7-40 % than the corresponding value for CdS. At 300 nm for the same spectral field the difference increases to 8-89 %. When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/33898