Факультет електроніки та інформаційних технологій (ЕлІТ)
Permanent URI for this communityhttps://devessuir.sumdu.edu.ua/handle/123456789/20
Browse
5 results
Search Results
Item Плавлення та термічна стабільність біметалевої наночастинки Ag@Pd(Сумський державний університет, 2025) Сухоруков, Б.С.Об’єктом дослідження кваліфікаційної роботи є біметалева наночастинка типу Ag@Pd з конфігурацією ядро–оболонка. Актуальність роботи полягає у необхідності вивчення термічної стабільності та особливостей фазового переходу наночастинок в умовах високих температур. Для візуального аналізу процесу плавлення використано програмне забезпечення OVITO та VMD, а для кількісного аналізу — індекс Ліндемана. Досліджено поступову зміну кристалічної структури наночастинки при нагріванні, виявлено стадії поверхневого плавлення, аморфізації ядра та досягнення рівноважної рідкої фази. Встановлено температуру початку фазового переходу в діапазоні 900–950 K. Результати можуть бути використані при моделюванні наноматеріалів із заданими термічними властивостями.Item Фазовий склад наночастинок Zn1-xMgxO(Сумський державний університет, 2025) Бойко, Б.; Пшеничний, Роман Миколайович; Pshenychnyi, Roman Mykolaiovych; Доброжан, Олександр Анатолійович; Dobrozhan, Oleksandr Anatoliiovych; Опанасюк, Анатолій Сергійович; Opanasiuk, Anatolii Serhiiovych; Дегтяренко, В.Zn1-xMgxO (ZMO) є твердим розчином сполук ZnO і MgO, де введення Mg змінює кристалічну структуру та ширину забороненої зони (Eg) матеріалу. ZnO кристалізується у гексагональній фазі вюрциту (Eg ≈ 3,37 еВ), тоді як MgO має кубічну структуру NaCl (Eg ≈ 7,8 еВ). Відомо, що при x ⩽ 0,49 у розчині спостерігається гексагональна фаза, а при x ⩾ 0,5 формується кубічна структура, що визначає його фізико-хімічні властивості. Контроль фазового складу ZMO є важливим для оптимізації оптичних і електричних характеристик матеріалу, а можливість зміни Eg робить його перспективним для застосування в оптоелектроніці, в першу чергу, як детекторного матеріалу на ультрафіолетову область спектра.Item Використання методу лазерної абляції для отримання наночастинок на основі благородних металів(Сумський державний університет, 2025) Самодай, В.С.; Янголь, В.Є.; Шабельник, Юрій Михайлович; Shabelnyk, Yurii MykhailovychОдним із найбільш ефективних методів синтезу наночастинок є лазерна абляція. Цей метод полягає у випаровуванні матеріалу з поверхні мішені під дією лазерного променя, після чого утворені атоми конденсуються в наночастинки в газовому або рідкому середовищі. Лазерна абляція має ряд переваг, таких як висока чистота отриманих наночастинок, можливість контролю їх розмірів та морфології, а також відсутність необхідності використання токсичних хімічних реагентів. Це робить метод лазерної абляції особливо привабливим для синтезу наночастинок, які будуть використовуватися в медицині та біотехнологіях.Item Atomistic modeling of formation and friction of materials with nanodimensional surfaces(Ivan Franko National University of Lviv, 2022) Хоменко, Олексій Віталійович; Хоменко, Алексей Витальевич; Khomenko, Oleksii Vitaliiovych; Захаров, Мирослав Владиславович; Захаров, Мирослав Владиславович; Zakharov, Myroslav Vladyslavovych; Gorpinchenko, M.O.The review presents the results of modeling of the solvation of nanoparticles with deep eutectic solvents that act as stabilizers of metal nanoparticles, which provide a new platform for nanoparticle technology. It is calculated that there is a slower dynamics of solvent molecules, i.e., a slowing down of water near solutes. Such water has limited movement and cannot be organized into tetrahedral forms, in contrast to water in volume. Also, the paper describes systematic studies of the adsorption configuration, distribution density and adsorption energy of molecules Н2О, CO2, CH4, N2, C8H18 and fluorocarbons C3F8 and C5F12 on the surface of kaolinite (001). Water adsorption is initiated and occurs due to the growth of clusters around surface groups, which is mainly regulated by the interactions of hydrogen bonds. Further, the paper investigates theoretically physical and mechanical properties of nanoscale systems, in particular, nanotips, amorphous carbon monolayer and nanoparticles. It is shown that the single-layer amorphous carbon is surprisingly stable and is deformed with a high ultimate strength without the propagation of cracks from the point of failure. The sliding on amorphous polyethylene and silicon studied using the method of molecular dynamics is described. The paper also discusses the dependencies of the friction force, acting on nanoparticles, on their velocity and sizes, in particular, the contact area, the structure and the type of the material, as well as on the direction of their shear and temperature. At an angle of rotation $ 45^\circ $, the silicon friction forces reach a minimum value, which can be termed superlubricity. The molecular dynamics modeling of the surface of carbon nanotubes, chitosan, polyvinyl acetate, titanium dioxide, α-quartz and zeolite is described to solve application problems ranging from reaction control to targeted delivery and creation of new drugs. The general principles have been identified that artificial water channels made of carbon nanotubes porins must satisfy, which can serve as a basis for further experiments. The organic modification mainly forms a modifier layer by crosslinking the hydrogen bond with the substrate, the flatness of the modified layer is strongly influenced by the type and concentration of the modifier.Item Atomistic modelling of frictional anisotropy of palladium nanoparticles on graphene(Institute for Condensed Matter Physics of the National Academy of Sciences of Ukraine, 2021) Хоменко, Олексій Віталійович; Хоменко, Алексей Витальевич; Khomenko, Oleksii Vitaliiovych; Захаров, Мирослав Владиславович; Захаров, Мирослав Владиславович; Zakharov, Myroslav VladyslavovychThis article is a continuation of our previous studies of the frictional anisotropy of metal nanoparticles on the surface of a graphene substrate for other temperature conditions. The friction force acting on palladium nanoparticles on a graphene sheet in various lateral directions is investigated using classical molecular dynamics modelling. Anisotropy is studied at high sliding speeds of nanoparticles consisting of 10000 atoms on the surface of graphene. The effect of incommensurability and short-range order of the contact surfaces of nanoparticles, as well as the graphene deformation lead to the absence of an expressed angular dependence of the friction force.