Факультет електроніки та інформаційних технологій (ЕлІТ)
Permanent URI for this communityhttps://devessuir.sumdu.edu.ua/handle/123456789/20
Browse
870 results
Search Results
Item Інформаційно-аналітична система оцінювання відповідності сучасним вимогам навчального контенту спеціальності кібербезпека(Національний аерокосмічний університет "Харківський авіаційний інститут", 2021) Довбиш, Анатолій Степанович; Dovbysh, Anatolii Stepanovych; Шелехов, Ігор Володимирович; Shelekhov, Ihor Volodymyrovych; Хібовська, Юлія Олексіївна; Khibovska, Yuliia Oleksiivna; Матяш, О.В.Розв’язана актуальна задача підвищення функціональної ефективності машинного навчання інформаційно-аналітичної системи (ІАС) оцінки відповідності сучасним вимогам контенту навчальних дисциплін бакалаврського рівня спеціальності «Кібербезпека» Розроблено метод інформаційно-екстремального машинного навчання ІАС з метою адаптації навчального контенту випускової кафедри до вимог ринку праці, що дозволяє при функціонуванні системи в режимі моніторингу оперативно корегувати контент з навчальних дисципліни випускової кафедри. Ідея методу полягає у максимізації інформаційної спроможності ІАС в процесі машинного навчання, що дозволяє в режимі моніторингу отримати максимальну повну ймовірність прийняття правильних класифікаційних рішень. За результатами інформаційно-екстремального машинного навчання в рамках геометричного підходу побудовано вирішальні правила, практично інваріантні до багато вимірності простору ознак розпізнавання. Як критерій оптимізації параметрів машинного навчання використовується модифікація інформаційної міри Кульбака, яка є функціоналом точнісних характеристик класифікаційних рішень. Як параметри оптимізації розглядалися геометричні параметри гіперсферичних контейнерів класів розпізнавання, які в процесі машинного навчання відновлювалися в радіальному базисі бінарного простору ознак Хеммінга. При цьому вхідна навчальна матриця трансформувалася в робочу бінарну навчальну матрицю, яка змінювалася в процесі машинного навчання шляхом допустимих перетворень з метою адаптації вхідного математичного опису системи до максимальної достовірності класифікаційних рішень. Запропоновано категорійну модель функціонування ІАС, на основі якої розроблено алгоритм інформаційно-екстремального машинного навчанням системи з автоматичним визначенням базового класу розпізнавання. За результатами опитування фахівців з кібербезпеки сформовано вхідну структуровану навчальну матрицю, а за результатами фізичного моделювання підтверджено працездатність запропонованого методу інформаційно-екстремального машинного навчання ІАС.Item Control of Structural and Magnetic Properties of Polycrystalline Co2FeGe Films via Deposition and Annealing Temperatures(MDPI, 2021) Vovk, A.; Bunyaev, S.A.; Štrichovanec, P.; Vovk, N.R.; Постольний, Богдан Олександрович; Postolnyi, Bohdan Oleksandrovych; Apolinario, A.; Pardo, J.Á.; Algarabel, P. A.; Kakazei, G.N.; Araujo, J.P.Thin polycrystalline Co2FeGe films with composition close to stoichiometry have been fabricated using magnetron co-sputtering technique. Effects of substrate temperature (TS) and postdeposition annealing (Ta) on structure, static and dynamic magnetic properties were systematically studied. It is shown that elevated TS (Ta) promote formation of ordered L21 crystal structure. Variation of TS (Ta) allow modification of magnetic properties in a broad range. Saturation magnetization ~920 emu/cm3 and low magnetization damping parameter ~ 0.004 were achieved for TS = 573 K. This in combination with soft ferromagnetic properties (coercivity below 6 Oe) makes the films attractive candidates for spin-transfer torque and magnonic devices.Item Температурна стабільність кристалічної структури, електро- і магнетотранспортних властивостей функціональних наноструктур спін-клапанного типу Ni/Dy/Co(Інститут металофізики ім. Г. В. Курдюмова НАН України, 2021) Логвинов, Андрій Миколайович; Lohvynov, Andrii Mykolaiovych; Кондрахова, Дар`я Миколаївна; Kondrakhova, Daria Mykolaivna; Шпетний, Ігор Олександрович; Shpetnyi, Ihor Oleksandrovych; Чешко, Ірина Володимирівна; Cheshko, Iryna Volodymyrivna; Воробйов, Сергій Ігорович; Vorobiov, Serhii Ihorovych; Чорноус, Анатолій Миколайович; Chornous, Anatolii MykolaiovychПоказано відносну температурну стабільність фазового стану, електро- і магнетотранспортних властивостей функціональних металевих плівкових наноструктур спін-клапанного типу Ni/Dy/Co у діапазоні температур 460–800 К. Встановлено, що товщина прошарку з Dy в межах dDy = 5–30 нм за товщини шару Ni 5 нм та Со 20 нм суттєво не впливає на кристалічну стру-ктуру зразків, фазовий склад яких відповідає ГЦК-Ni + квазіаморфний-Dy + ГЩП-Со + ГЦК-Со. Досліджено функціональні структури, що мають ані-зотропний характер залежностей магнетоопору від напрямку прикладено-го зовнішнього магнетного поля відносно напрямку струму, який не зале-жить від товщини прошарку та температури обробки. Максимальне зна-чення магнетоопору спостерігалось у свіжосконденсованих плівках тов-щиною dDy = 30 нм і складало 0,5% за кімнатної температури вимірювання, а після відпалювання до 800 К — за товщини dDy = 20 нм. Величина ко-ерцитивної сили не проявляє яскраво вираженої залежності від товщини прошарку з Dy, а відпалювання до 800 К призводить до її зростання. Різка зміна значень магнетоопору і коерцитивної сили у випадку зміни орієнта-ції зразків у зовнішньому магнетному полі дозволяє розглядати дану плів-кову наноструктуру як функціональний елемент електроніки.Item Building of a digital model of aluminum electrolysis modes(Journal of Physics: Conference Series, 2021) Vereschagina, E.A.; Zolkin, A.L.; Лавров, Євгеній Анатолійович; Lavrov, Yevhenii Anatoliiovych; Fakhertdinova, D.I.; Dragulenko, V.V.The article discusses the issues of constructing a digital model of aluminum electrolysis modes. This model allows to achieve the specified criteria of the production process on the basis of scientific processing of historical data accumulated during the industrial production of aluminum at factories using a mathematical apparatus as well as to obtain recommendations on the values of control parameters. The study is aimed at achieving the business goals of the company's management in particular on increasing of the profits by improving the quality and quantity of products with reduced production costs.Item Analysis of information security issues in corporate computer networks(IOP Conference Series: Materials Science and Engineering, 2021) Лавров, Євгеній Анатолійович; Lavrov, Yevhenii Anatoliiovych; Zolkin, A.L.; Aygumov, T.G.; Chistyakov, M.S.; Akhmetov, I.V.This article discusses the main problems associated with information security in corporate networks and ensuring the reliable operation of information systems and the services they provide. Information security is understood as the security of information resources and information systems, as well as the supporting infrastructure from accidental or deliberate influences of a natural or artificial nature, fraught with harm to the owners or users of information resources. Currently, there are major changes in information security issues. They relate to the methods of work of attackers, the conditions of crimes commited in the computer sphere, as well as the consequences of illegal activities.Item Adhesion and friction in hard and soft contacts: theory and experiment(Tsinghua University Press, 2021) Popov, V.L.; Li, Q.; Ляшенко, Яків Олександрович; Liashenko, Yakiv Oleksandrovych; Pohrt, R.This paper is devoted to an analytical, numerical, and experimental analysis of adhesive contacts subjected to tangential motion. In particular, it addresses the phenomenon of instable, jerky movement of the boundary of the adhesive contact zone and its dependence on the surface roughness. We argue that the "adhesion instabilities" with instable movements of the contact boundary cause energy dissipation similarly to the elastic instabilities mechanism. This leads to different effective works of adhesion when the contact area expands and contracts. This effect is interpreted in terms of “friction” to the movement of the contact boundary. We consider two main contributions to friction: (a) boundary line contribution and (b) area contribution. In normal and rolling contacts, the only contribution is due to the boundary friction, while in sliding both contributions may be present. The boundary contribution prevails in very small, smooth, and hard contacts (as e.g., diamond-like-carbon (DLC) coatings), while the area contribution is prevailing in large soft contacts. Simulations suggest that the friction due to adhesion instabilities is governed by "Johnson parameter". Experiments suggest that for soft bodies like rubber, the stresses in the contact area can be characterized by a constant critical value. Experiments were carried out using a setup allowing for observing the contact area with a camera placed under a soft transparent rubber layer. Soft contacts show a great variety of instabilities when sliding with low velocity – depending on the indentation depth and the shape of the contacting bodies. These instabilities can be classified as "microscopic" caused by the roughness or chemical inhomogeneity of the surfaces and "macroscopic" which appear also in smooth contacts. The latter may be related to interface waves which are observed in large contacts or at small indentation depths. Numerical simulations were performed using the Boundary Element Method (BEM).Item An experimental study on third-body particle transport in sliding contact(University of Nis, 2021) Li, Q.; Ляшенко, Яків Олександрович; Liashenko, Yakiv Oleksandrovych; Starcevic, J.An experiment is designed to study the third-body particle transport in a rough contact. To study the influence of particles in a pure form, it is assured that the first bodies have no contact and the sliding is very slow, so that the process can be considered as quasistatic. An example of sliding contact of a 3D printed “rough body” on small spheres artificially located on a rubber layer is presented. The trajectory of particles during the sliding is captured for studying their movement and the correlation to the fluctuation of normal and tangential force.Item Crystal Structure, Phase State, and Magnetoresistive Properties of Nanostructured Thin-Film Systems Based on Permalloy and Noble Metals(G. V. Kurdyumov Institute for Metal Physics of the N.A.S. of Ukraine, 2022) Пазуха, Ірина Михайлівна; Pazukha, Iryna Mykhailivna; Шкурдода, Юрій Олексійович; Shkurdoda, Yurii OleksiiovychWe review and analyse the literature data on the experimental results dealing with the crystal structure, phase state, and magnetoresistive properties of nanostructured thin-film systems based on NixFe1–x permalloy and noble metals prepared by the methods of co-evaporation and layer-by-layer condensation. As shown, regardless of preparation methods, the phase state of systems stays as two-phase one. Upon high-temperature annealing, the formation of solid solutions is possible. As shown, in the case of applying of layer-by-layer condensation method, the value of the magnetoresistive effect depends on the thickness of the magnetic and nonmagnetic layers. In the case of applying the co-evaporation method, the determining parameters are the concentrations of the components and the total thickness of the system. The annealing-temperature effect on magnetoresistive properties of nanostructured thin-film systems based on permalloy and noble metals is analysed.Item Effect of Ru Interlayer thickness on Electrophysical Properties of Co/Ru/Co three-layer film systems(Vasyl Stefanyk Precarpathian National University, 2022) Логвинов, Андрій Миколайович; Lohvynov, Andrii Mykolaiovych; Чешко, Ірина Володимирівна; Cheshko, Iryna Volodymyrivna; Пазуха, Ірина Михайлівна; Pazukha, Iryna Mykhailivna; Tyschenko, K.V.; Пилипенко, Олександр Валерійович; Pylypenko, Oleksandr Valeriiovych; Zahorulko, A.Yu.У даній роботі були проведені дослідження структурно-фазового стану та електрофізичних властивостей тришарових плівкових систем Co/Ru/Co/Sub при зміні товщини шару Ru, dRu = 5-20 нм. Було показано, що як у свіжо сконденсованому стані, так і після відпалювання до 800 К, фазовий стан системи відповідає ГЩП-Co + ГЩП-Ru. Були отримані залежності питомого опору та температурного коефіцієнту опору як функції dRu. Показано, що зміна величини питомого опору на першому циклі термообробки стає тим більш сильною, чим більше товщина шару Ru. Величина температурного коефіцієнту опору має порядок 104 та збільшується з 5,05104 до 6,42104 K1 при зміні товщини dRu в діапазоні 0-20 нм.Item Phase transformations during the doping of zinc chloride and silver nitrate into calcium phosphates(Karagandy University of the name of academician E.A. Buketov, 2022) Sagidugumar, A.N.; Turlybekuly, A.; Dogadkin, D.; Погребняк, Олександр Дмитрович; Pohrebniak, Oleksandr Dmytrovych; Kantay, N.; Sadibekov, A.This article shows the results of a study on a biocomposite material based on calcium phosphate doped with ZnCl and AgNO3. Calcium phosphates are mainly used in dentistry and orthopedics due to their excellent bi-ocompatibility, osteoconductive properties and similarity to the inorganic components of human bone. The main objective of the study is to investigate the morphology, elemental and phase composition, and physico-chemical properties of the obtained material. The test material is obtained in the form of a suspension and subjected to ultrasonic treatment. The microstructure and phase composition of the obtained biocomposites are studied by SEM, XRD, FTIR methods. It is possible to obtain dicalcium phosphate dihydrate (DCPD) by the presented methods, and the results demonstrate a partial replacement of calcium atoms by zinc atoms. X-ray phase analysis shows that Ca(HPO4) (H2O)2 phases as well as CaZn2 (PO4)2(H2O)2 and AgCl phases were formed during the reaction. Fourier transform infrared spectroscopy revealed that the obtained samples con-tain the groups HPO42 and PO43, with the group PO42 replacing the group CO32. The biocomposite materials could be of great interest in the biomedical field, including the development of coatings that prevent or delay the development of bacterial biofilm.