Факультет електроніки та інформаційних технологій (ЕлІТ)
Permanent URI for this communityhttps://devessuir.sumdu.edu.ua/handle/123456789/20
Browse
15 results
Search Results
Item Атомiстичне моделювання фрикцiйної анізотропії наночастинок паладію на графені(Cумський державний університет, 2024) Малютiн, В.О.Вивчена модель Хоменка-Захарова фрикційної анiзотропiї наночастинок паладiю на графенi. Розширено модель Хоменка-Захарова, та зроблено її аналіз.Item Атомістичне моделювання фрикційної анізотропії металевих наночастинок на графені(Сумський державний університет, 2023) Чопов, А.П.Досліджено анізотропію тертя металевих наночастинок за допомогою методу молекулярної динаміки. Обчислення проводилися для наночастинок алюмінію, паладію і платини, що містять 10000 атомів. Анізотропія досліджується при високих швидкостях ковзання наночастинок по графеновій поверхні. Вплив неспівмірності та ближнього порядку контактних поверхонь наночастинок приводить до відсутності вираженої залежності сили тертя від кута зсуву.Item Computer Modelling of Metal Nanoparticles Adsorbed on Graphene(G. V. Kurdyumov Institute for Metal Physics of the N.A.S. of Ukraine, 2022) Хоменко, Олексій Віталійович; Хоменко, Алексей Витальевич; Khomenko, Oleksii Vitaliiovych; Бєсєдіна, Антоніна Анатоліївна; Беседина, Антонина Анатольевна; Biesiedina, Antonina Anatoliivna; Хоменко, Катерина Павлівна; Хоменко, Екатерина Павловна; Khomenko, Kateryna Pavlivna; Chernushchenko, R.R.The influence of deposited Al, Pd, Co, Au, Ni atoms on a single-layer graphene substrate is investigated using computer simulations. The computer modelling of spraying nanoparticles on the basis of molecular dynamics method is implemented using the NVIDIA®CUDATM technique. According to the results of model calculations, the general behaviour of the system is investigated. The experiments are performed to study the sputtering of atoms of different metals under different initial conditions of the system. Based on these sprays, the behaviour at the beginning of the interaction of the deposited atoms with the substrate is analysed. The time dependences of the lateral position of nanoparticles’ centre of mass and the substrate force throughout the experiment for different sprayed materials are compared. The behaviour of total and potential energies, temperature and momentum of the system is studied. As shown, there is a jump in total energy and temperature as well as a change in the behaviour of the momentum and the substrate force when carbon atoms of graphene are reached for all depositions.Item Atomistic modeling of formation and friction of materials with nanodimensional surfaces(Ivan Franko National University of Lviv, 2022) Хоменко, Олексій Віталійович; Хоменко, Алексей Витальевич; Khomenko, Oleksii Vitaliiovych; Захаров, Мирослав Владиславович; Захаров, Мирослав Владиславович; Zakharov, Myroslav Vladyslavovych; Gorpinchenko, M.O.The review presents the results of modeling of the solvation of nanoparticles with deep eutectic solvents that act as stabilizers of metal nanoparticles, which provide a new platform for nanoparticle technology. It is calculated that there is a slower dynamics of solvent molecules, i.e., a slowing down of water near solutes. Such water has limited movement and cannot be organized into tetrahedral forms, in contrast to water in volume. Also, the paper describes systematic studies of the adsorption configuration, distribution density and adsorption energy of molecules Н2О, CO2, CH4, N2, C8H18 and fluorocarbons C3F8 and C5F12 on the surface of kaolinite (001). Water adsorption is initiated and occurs due to the growth of clusters around surface groups, which is mainly regulated by the interactions of hydrogen bonds. Further, the paper investigates theoretically physical and mechanical properties of nanoscale systems, in particular, nanotips, amorphous carbon monolayer and nanoparticles. It is shown that the single-layer amorphous carbon is surprisingly stable and is deformed with a high ultimate strength without the propagation of cracks from the point of failure. The sliding on amorphous polyethylene and silicon studied using the method of molecular dynamics is described. The paper also discusses the dependencies of the friction force, acting on nanoparticles, on their velocity and sizes, in particular, the contact area, the structure and the type of the material, as well as on the direction of their shear and temperature. At an angle of rotation $ 45^\circ $, the silicon friction forces reach a minimum value, which can be termed superlubricity. The molecular dynamics modeling of the surface of carbon nanotubes, chitosan, polyvinyl acetate, titanium dioxide, α-quartz and zeolite is described to solve application problems ranging from reaction control to targeted delivery and creation of new drugs. The general principles have been identified that artificial water channels made of carbon nanotubes porins must satisfy, which can serve as a basis for further experiments. The organic modification mainly forms a modifier layer by crosslinking the hydrogen bond with the substrate, the flatness of the modified layer is strongly influenced by the type and concentration of the modifier.Item Atomistic modelling of frictional anisotropy of palladium nanoparticles on graphene(Institute for Condensed Matter Physics of the National Academy of Sciences of Ukraine, 2021) Хоменко, Олексій Віталійович; Хоменко, Алексей Витальевич; Khomenko, Oleksii Vitaliiovych; Захаров, Мирослав Владиславович; Захаров, Мирослав Владиславович; Zakharov, Myroslav VladyslavovychThis article is a continuation of our previous studies of the frictional anisotropy of metal nanoparticles on the surface of a graphene substrate for other temperature conditions. The friction force acting on palladium nanoparticles on a graphene sheet in various lateral directions is investigated using classical molecular dynamics modelling. Anisotropy is studied at high sliding speeds of nanoparticles consisting of 10000 atoms on the surface of graphene. The effect of incommensurability and short-range order of the contact surfaces of nanoparticles, as well as the graphene deformation lead to the absence of an expressed angular dependence of the friction force.Item Методика формування графену на тонких плівках Ru(Сумський державний університет, 2018) Логвинов, Андрій Миколайович; Логвинов, Андрей Николаевич; Lohvynov, Andrii Mykolaiovych; Васюхно, М.В.Поширеним методом отримання графену є його епітаксійне формування на поверхні тонких полікристалічних плівок Ni або Ru товщиною 50÷500 нм в процесі вакуумного термічної конденсації атомів вуглецю. Таким методом отримують одно- та багатошаровий графен, що застосовується для створення гнучких функціональних елементів електроніки, наприклад, надшвидких транзисторів, наноконденсаторів великої ємності, гнучких елементів живлення та систем відображення інформації. Особливість таких структур полягає у високій стабільності їх робочих характеристик до температур 400 К.Item Исследование зависимости коэффициента дифференциальной термоЭДС двухслойных примесных графеновых лент от напряженности внешнего электрического поля(Сумский государственный университет, 2017) Судоргин, С.А.Исследован характер зависимости коэффициента дифференциальной термоЭДС примесных двухслойных графеновых нанолент с адсорбированными на их поверхности атомами водорода во внешнем электрическом поле. Электронная подсистема двухслойных примесных графеновых нанолент рассматривается в π-электронном приближении и описывается известным дисперсионным соотношением. В квазиклассическом приближении времени релаксации при постоянной концентрации электронов проводимости в линейном приближении по величине градиента температуры получено аналитическое выражение для дифференциальной термоЭДС углеродных наночастиц во внешнем электрическом поле.Item Графен – революційний матеріал наноелектроніки(Сумський державний університет, 2015) Горячий, П.Однією з вимог сучасності до пристроїв, це є їх мініатюризація. Але зменшення розмірів часто призводить до падіння функціональності пристрою, зменшення строку життя, погіршення теплових властивостей тощо. Щоб обійти такі втрати необхідно використання нових матеріалів.Item Графен та його унікальні властивості(Сумський державний університет, 2013) Лісовенко, М.О.Графен - єдиний двомірний матеріал, який складається з одноатомного шару вуглецю, що формує гексагональну решітку. Його одержують в результаті механічного, або хімічного впливу на графіт.Item Застосування графену в електроніці(Сумський державний університет, 2014) Босенко, В.С.Графен являє собою вуглецеву плівку завтовшки в один атом, кристалічна решітка якої має форму сітки з шестикутників. Отримують графен з природного графіту, який видобувається у вугільних шахтах і з якого роблять, наприклад, прості олівці або гальма автомобіля.