Magnetoresistive properties of multilayer film systems based on Fe/Cu and Fe/Cr
No Thumbnail Available
Date
2009
Journal Title
Journal ISSN
Volume Title
Publisher
Вид-во СумДУ
Article
Date of Defense
Scientific Director
Speciality
Date of Presentation
Abstract
Досліджені магніторезистивні властивості багатошарових плівкових систем на основі Fe і Cu або Cr при кімнатній температурі. Вивчені фактори, які впливають на зміну величини магнітоопору (МО). В плівковій системі Fe/Cu, в якій зберігається індивідуальність окремих шарів, перехід від аморфної підкладки із ситалу до монокристалічної Si(111) веде до збільшення величини МО на 35 %, що пов’язано з магнітним упорядкуванням в нижньому епітаксійному шарі Fe. Термічне відпалювання зразків до 700 К призводить до руйнування непарного ефекту в МО в перпендикулярній геометрії та збільшення його величини в 2 рази в паралельних геометрія. Дослідження системи [Fe(dFe)/Cr(1)]10 показали, що збільшення товщини шару Fe від 0,31 до 1,5 нм призводить до збільшення величини МО від 0,03-0,05 % до 1-3 % в залежності від геометрії вимірювання, що пояснюється утворенням гранул Fe в матриці твердого розчину (Fe, Cr).
При цитуванні документа, використовуйте посилання http://essuir.sumdu.edu.ua/handle/123456789/3593
The magnetoresistive properties of multilayer film systems based on Fe and Cu or Cr were investigated at room temperature. Factors influencing on magnetoresistance (MR) value changing were studied. In Fe/Cu film system, in which the individuality of separate layers holds, the change of substrate from amorphous pyroceramic to monocrystalline Si(111) leads to MR ratio increasing on 35 %, that is connected with magnetic ordering in bottom epitaxial Fe layer. Thermal annealing of samples to 700 K leads to vanishing of odd effect in MR in perpendicular geometry and MR increasing by two times in parallel geometries. Investigations of [Fe(dFe)/Cr(1)]10 system showed, that the Fe thickness changes from 0,31 to 1,5 nm lead to the magnetoresistance magnitude changes from 0,03-0,05 % to 1-3 % subject to different measurement geometries, which is interpreted by Fe granules formation in matrix of solid solution (Fe, Cr). При цитировании документа, используйте ссылку http://essuir.sumdu.edu.ua/handle/123456789/3593
The magnetoresistive properties of multilayer film systems based on Fe and Cu or Cr were investigated at room temperature. Factors influencing on magnetoresistance (MR) value changing were studied. In Fe/Cu film system, in which the individuality of separate layers holds, the change of substrate from amorphous pyroceramic to monocrystalline Si(111) leads to MR ratio increasing on 35 %, that is connected with magnetic ordering in bottom epitaxial Fe layer. Thermal annealing of samples to 700 K leads to vanishing of odd effect in MR in perpendicular geometry and MR increasing by two times in parallel geometries. Investigations of [Fe(dFe)/Cr(1)]10 system showed, that the Fe thickness changes from 0,31 to 1,5 nm lead to the magnetoresistance magnitude changes from 0,03-0,05 % to 1-3 % subject to different measurement geometries, which is interpreted by Fe granules formation in matrix of solid solution (Fe, Cr). При цитировании документа, используйте ссылку http://essuir.sumdu.edu.ua/handle/123456789/3593
Keywords
film system, magnetoresistance, thermal annealing, плівкова система, магнітоопір, термовідпалювання, пленочная система, магнитосопротивление, термоотжиг
Citation
Synashenko, O.V.
Magnetoresistive properties of multilayer film systems based on Fe/Cu and Fe/Cr [Текст] / O.V. Synashenlo, Ch.J. Panchal, I.Yu. Protsenko // Журнал нано- та електронної фізики. — 2009. — № 3, Т.1. — C. 16-23.