Electrical and Electrodynamic Properties of Polymer Composites with Nanocarbon Filler

dc.contributor.authorOvsiienko, I.V.
dc.contributor.authorVovchenko, L.L.
dc.contributor.authorMatzui, L.Yu.
dc.contributor.authorLen, T.A.
dc.contributor.authorShut, M.I.
dc.contributor.authorSichkar, T.G.
dc.contributor.authorShut, M.M.
dc.date.accessioned2024-12-26T13:19:41Z
dc.date.available2024-12-26T13:19:41Z
dc.date.issued2024
dc.description.abstractУ статті наведено результати дослідження електричних та електродинамічних властивостей полімерних композитів на основі поліхлортрифторетилену з різними нановуглецевими наповнювачами за теплового навантаження. В якості нановуглецевих наповнювачів використано терморозширений графіт, модифікований оксидом кремнію, і багатошарові вуглецеві нанотрубки. Модифікацію ТРГ кремнеземом проводили з колоїдного 20 % розчину гідрозолю (кремнієвої кислоти). Для досліджень методом термічного пресування отримано масивні полімерні композити на основі поліхлортрифторетилену з різним вмістом нановуглецевого наповнювача. Досліджено діелектричну проникність при кімнатній температурі за допомогою ультрависокочастотного інтерферометра на частоті v = 10 ГГц. Температурну залежність електропровідності σ(Т) вимірювали дво- та чотиризондовим методами на постійному та змінному струмі в інтервалі температур (293-425) К. Температурну залежність електродинамічних параметрів досліджували за допомогою панорамних вимірювачів стояння. коефіцієнт хвиль і ослаблення електромагнітного випромінювання в інтервалі температур (293-373) К. Показано, що використання в якості наповнювачів терморозширеного графіту, модифікованого вуглецевими нанотрубками SiO2, дозволяє отримати електропровідні полімерні композити з низьким порогом перколяції ~ 0,955 % мас. При концентраціях наповнювача, менших за поріг перколяції, основний внесок в електропровідність полімерного композиту вносить релаксаційна складова провідності, яка визначається процесами міжфазної поляризації на межі розділу полімер-наповнювач. При концентрації наповнювача в полімерному композиті трохи вище межі перколяції відбувається збільшення внеску прямої електропровідності за рахунок прямих контактів і контактів через тонкі шари полімеру між частинками наповнювача. Виявлено, що нагрівання полімерних композитів до 373 К призводить до незначного поліпшення характеристик екранування в основному за рахунок збільшення коефіцієнта поглинання електромагнітного випромінювання. Зміни ефективної діелектричної проникності полімерних композитів в інтервалі температур (293-373) К не впливають суттєво на екрануючі характеристики досліджуваних полімерних композитів.en_US
dc.description.abstractThe paper presents the results of investigation of electrical and electrodynamic properties of polymer composites based on polychlorotrifluoroethylene with different nanocarbon fillers under heat load. As nanocarbon fillers thermoexfoliated graphite, thermoexfoliated graphite modified by silicon oxide and multiwalled carbon nanotubes have been used. Modification of TEG with silica was carried out from a colloidal 20 % solution of hydrosol (silicic acid). For investigations the bulk polymer composites based on polychlorotrifluoroethylene with different content of nanocarbon filler have been obtained by thermal pressing. The dielectric permittivity have been studied at room temperature using an ultra-high-frequency interferometer at a frequence υ = 10 GHz. Temperature dependence of electrical conductivity σ(Т) have been measured by two- and four-probe methods on direct and alternating current in temperature interval (293-425) K. Temperature dependence of the electrodynamic parameters has been studied with use panoramic meters of standing wave ratio and electromagnetic radiation attenuation in the temperature interval (293-373) K. It is shown that use of thermoexfoliated graphite, thermoexfoliated graphite modified with SiO2 Carbon nanotubes as fillers allows to obtain electrically conductive polymer composites with low percolation threshold ~ 0.955 % mass. At filler concentrations lower than the percolation threshold, the main contribution to the electrical conductivity of the polymer composite is made by the relaxation component of the conductivity, which is determined by the processes of interphase polarization at the polymer-filler interface. At filler concentration in the polymer composite is slightly higher than the percolation limit, the increase of the contribution of direct electrical conductivity due to direct contacts and contacts through thin polymer layers between fillers particles occurs. It is revealed that heat of polymer composites up to 373 K leads to slight improvement in shielding characteristics mainly due to an increase in the electromagnetic radiation absorption coefficient. Changes in the effective dielectric permittivity of polymer composites in the temperature range of (293-373) K do not dramatically affect the shielding characteristics of investigated polymer composites.en_US
dc.identifier.citationI.V. Ovsiienko et al., J. Nano- Electron. Phys. 16 No 6, 06023 (2024) https://doi.org/10.21272/jnep.16(6).06023en_US
dc.identifier.urihttps://essuir.sumdu.edu.ua/handle/123456789/97686
dc.language.isoenen_US
dc.publisherSumy State Universityen_US
dc.rights.uriCC BY 4.0en_US
dc.subjectполіхлортрифторетиленen_US
dc.subjectтерморозширенний графітen_US
dc.subjectбагатошарові вуглецеві нанотрубкиen_US
dc.subjectелектропровідністьen_US
dc.subjectдіелектрична проникністьen_US
dc.subjectpolychlorotrifluoroethyleneen_US
dc.subjectthermoexfoliated graphiteen_US
dc.subjectmultiwall carbon nanotubesen_US
dc.subjectconductivityen_US
dc.subjectdielectric permittivityen_US
dc.titleElectrical and Electrodynamic Properties of Polymer Composites with Nanocarbon Filleren_US
dc.title.alternativeЕлектричні та електродинамічні властивості полімерних композитів з нановуглецевим наповнювачемen_US
dc.typeArticleen_US

Files

Original bundle

Now showing 1 - 1 of 1
No Thumbnail Available
Name:
Ovsiienko_jnep_6_2024.pdf
Size:
457.96 KB
Format:
Adobe Portable Document Format
Description:

License bundle

Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
3.96 KB
Format:
Item-specific license agreed upon to submission
Description: