Structural features and physico-mechanical properties of AlN-TiB2-TiSi2 amorphous-like coatings
No Thumbnail Available
Date
2015
Journal Title
Journal ISSN
Volume Title
Publisher
Allerton Press, Inc
Article
Date of Defense
Scientific Director
Speciality
Date of Presentation
Abstract
The coating of the AlN–TiB2–TiSi2 system has been produced by the magnetron sputtering of
a target. At the hightemperature (900 and 1300°C) actions the coating crystallization to form crystallites
of sizes 11–25 nm has been observed. It has been defined that the amorphouslike structure is promising
for the use of these coatings as diffusion barriers both as the independent elements and a contacting layer
in multilayer wearresistant coatings. It has been shown that the use of the resultant composite as an effec
tive protective coating for cutting tools will make it possible to increase the tools wear resistance by more
than 30% at the temperature up to 1300°C in the cutting zone.
Keywords
nanocomposite coating, magnetron sputtering, phase and elemental compositions, microhard ness, annealing
Citation
Structural features and physico-mechanical properties of AlN-TiB2-TiSi2 amorphous-like coatings [Текст] / A. D. Pogrebnjak, A. A. Demianenko, A. V. Pshik [et al.] // Journal of Superhard Material. — 2015. — №37(5). — С. 310-321.