Please use this identifier to cite or link to this item: https://essuir.sumdu.edu.ua/handle/123456789/87563
Or use following links to share this resource in social networks: Recommend this item
Title Development of pumps with improved anti-cavitation characteristics
Authors Tiahno, Oleksandr Viacheslavovych  
Vorozhka, Anatolii Serhiiovych  
Ovcharenko, Mykhailo Serhiiovych
Loburenko, Mykhailo Vasylovych
Papchenko, Andrii Anatoliiovych
ORCID http://orcid.org/0000-0003-1407-7650
http://orcid.org/0000-0002-0859-1920
Keywords cantilever pump
centrifugal impeller
reducer
cavitation reserve
film evaporator
Type Article
Date of Issue 2021
URI https://essuir.sumdu.edu.ua/handle/123456789/87563
Publisher PC Technology Center
License Creative Commons Attribution 4.0 International License
Citation Tiahno, O., Vorozhka, A., Ovcharenko, M., Loburenko, M., & Papchenco, A. (2021). Development of pumps with improved anti-cavitation characteristics. Eastern-European Journal of Enterprise Technologies, 5(1(113), 33–40. https://doi.org/10.15587/1729-4061.2021.243114
Abstract When considering the creation of pumps with improved anti-cavitation characteristics, the results of an in-depth analysis of the problem of pumping viscous liquids at high temperatures are presented. On the example of the technological process of evaporation of sugar syrup on a film evaporator of the latest type, the problem of the occurrence of cavitation when pumping viscous liquids at high temperatures was revealed. After analyzing the existing machines used for the specified operating conditions, critical design and operating parameters were identified that affect the appearance of cavitation. Namely, the appearance of cavitation is influenced by the reduced diameter of the impeller inlet, the diameter of the impeller inlet, the number of blades, the width of the blades and the rotor speed. To study the level of influence of these parameters, a method of physical modeling was chosen, an experimental stand was designed and manufactured. Studies have been carried out on the operation of the pump with and without a reducer. The work with a two- and three-blade inducer is analyzed, the work with an open and closed impeller, with one and two-level blade system is investigated. As a result of the analysis of experimental data, the optimal design of the hydraulic part with a three-blade reducer and a semi-open impeller with a two-level blade system was chosen. In turn, this made it possible to reduce the compression of the flow at the inlet to the impeller without loss of energy efficiency; the angles of inclination of the inducer and impeller blades were synchronized. The experience gained made it possible to design and manufacture an industrial sample of a cantilever pump with an inducer and a semi-open impeller. Thus, allowing to solve the problem of pumping thick syrup on a film evaporating unit of the Teofipol sugar plant (Khmelnytskyi region, Ukraine), with a cavitation reserve of 1.5 m.
Appears in Collections: Наукові видання (ТеСЕТ)

Views

Australia Australia
1
China China
1
Finland Finland
251
Germany Germany
1
Greece Greece
481
Ireland Ireland
144052
Japan Japan
1
Lithuania Lithuania
1
Singapore Singapore
1
Ukraine Ukraine
21594128
United Kingdom United Kingdom
267320
United States United States
37702113
Unknown Country Unknown Country
1
Vietnam Vietnam
479

Downloads

Bosnia & Herzegovina Bosnia & Herzegovina
1
Hong Kong SAR China Hong Kong SAR China
1
India India
1
Lithuania Lithuania
1
Romania Romania
1
Spain Spain
1
Ukraine Ukraine
21594129
United Arab Emirates United Arab Emirates
1
United Kingdom United Kingdom
1
United States United States
59708832
Unknown Country Unknown Country
1
Vietnam Vietnam
1

Files

File Size Format Downloads
Tiahno_et_al_Development_of_pumps_2021.pdf 997.42 kB Adobe PDF 81302971

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.