Please use this identifier to cite or link to this item: https://essuir.sumdu.edu.ua/handle/123456789/88281
Or use following links to share this resource in social networks: Recommend this item
Title Вибір матеріалу, маршрутної технології виготовлення та термічної обробки деталі "втулка"
Authors Негреба, Н.Ю.
ORCID
Keywords втулка
атомна енергетика
сталь
термічна обробка
аустеніт
мартенсит
твердість
міжкристалітна корозія
bushing
nuclear energy
steel
heat treatment
austenite
martensite
hardness
intercretal corrosion
Type Bachelous Paper
Date of Issue 2022
URI https://essuir.sumdu.edu.ua/handle/123456789/88281
Publisher Сумський державний університет
License Copyright not evaluated
Citation Негреба Н. Ю. Вибір матеріалу, маршрутної технології виготовлення та термічної обробки деталі "втулка" : робота на здобуття кваліфікаційного ступеня бакалавра : спец. 132 – матеріалознавство / наук. кер. Н. А. Харченко. Суми : СумДУ, 2022. 69 с.
Abstract Кваліфікаційна робота на здобуття кваліфікації бакалавр зі спеціальності 132 – Матеріалознавство. Сумський державний університет. Суми, 2022. Проаналізовані основні аспекти умов роботи деталі «втулка» головного циркуляційного насосу. Проведений аналіз експлуатаційних властивостей виробу. Призначено матеріал сталь 25Х17Н2Б-Ш. Розроблена поетапна маршрутна технологія виготовлення деталі. Вдосконалено базовий варіант термічної обробки деталі «втулка». Запропонована термічна обробка складається з операцій: відпал, гартування, обробка холодом і подвійний відпуск. Проаналізовані мікро- та макроструктура визначені твердість обраної сталі після термічної обробки. Проведені випробування на стійкість до міжкристалічної корозії.
Qualifying work of a bachelor in specialty 132 - Materials Science. Sumy State University. Sumy, 2022. The bachelor's thesis contains: 67 pages, including 10 tables, 20 figures, a list of 36 used sources on 3 pages, 7 appendices on 8 pages. The purpose of the work is the purpose of the material of the "sleeve" part of the main circulation pump, as well as the development of route technology for the manufacture and heat treatment of the "sleeve" part. Thus, the author of the work took steps to achieve the above goal: 1. The part "sleeve" is considered, as well as the main circulating pump 195M, in which the part operates, describing the purpose and operating conditions of the part. Also, the analyzed material is generalized, and the necessary operational characteristics of the part are formulated. 2. A critical analysis of literary sources. The main methods of improving the characteristics and properties of steel 25Cr17N2Nb-Sh by adding alloying elements and conducting modern heat treatment operations are analyzed. 3. Steel was selected for the manufacture of this part, as well as micro- and macroanalysis, hardness measurements and tests for susceptibility to IGC. 4. Developed a modern technological process of manufacturing parts "sleeve". The following sequence of operations is offered: ore extraction; obtaining cast iron; steel smelting; obtaining a blank; heat treatment; obtaining parts, non-reinforcing heat treatment (low tempering). 5. Equipment for heat treatment of this steel is selected. The main causes of failure are mechanical wear, cyclic fatigue, corrosion, cavitation wear and intergranular corrosion. Requirements for the finished product: yield strength (σ0,2) is 1175 MPa, temporary resistance (σV) - 1470 MPa, elongation (δ) not more than 8%, relative narrowing (ψ) not more than 45%, impact in viscosity (KCU) - 50 J / cm2, hardness (HRC) - 28. The work is related to the study of the effect of heat treatment on the corrosion resistance, strength and toughness of the NCP bushing, made of high quality steel 25Cr17N2Nb-Sh. The reliability of the performance of such parts is determined primarily by the yield strength, elongation and narrowing, toughness, resistance to intergranular corrosion and hardness of the material from which the part is made. The technology of production and heat treatment of the 25Cr17N2Nb-Sh steel pump hub was recommended and implemented in the production conditions of KOMPRESORATOMMASH LLC (Appendix A). The main results of the work are implemented in the educational process at the Faculty of Technical Systems and Energy Efficient Technologies of Sumy State University in the courses "Metallurgy and Basics of Heat Treatment", "Corrosion and Protection of Materials", "Alloy Steels and Alloys", "Mechanical Properties and Wear Resistance of Materials and Products" specialty 132 "Materials Science". It was determined that the final structure of steel 25Cr17N2Nb-Sh martensite and austenite. Defects identified central porosity and total spot liquation score 1. In addition, oxide point score 1 was detected. The hardness of steel 25Cr17N2Nb-Sh after heat treatment is 28 НRC, which satisfies the basic requirements for the part "sleeve". Steel 25Cr17N2Nb-Sh after the recommended heat treatment proved to be resistant to IGC.
Appears in Collections: Кваліфікаційні роботи здобувачів вищої освіти (ТеСЕТ)

Views

Canada Canada
1
China China
2433553
Georgia Georgia
224
Germany Germany
1
Ireland Ireland
1580
Japan Japan
1
Ukraine Ukraine
405293002
United Kingdom United Kingdom
108503
United States United States
1221555492
Unknown Country Unknown Country
294379

Downloads

Armenia Armenia
1
Belgium Belgium
1576
China China
813424248
Czechia Czechia
774409
France France
1
Germany Germany
24370506
Indonesia Indonesia
1
Ireland Ireland
242040504
Japan Japan
813424251
Ukraine Ukraine
242040504
United States United States
405293002
Unknown Country Unknown Country
1

Files

File Size Format Downloads
Nehreba_bak_rob.pdf 3.31 MB Adobe PDF -1753598292

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.